| BMW E28 Suspension Tools & Books - Page 2 |
Suspension Tools |
| Bushing Master Kit |
| No need to disassemble the whole rear end in order to use a hydraulic press with this tool. Designed for "On the Car Application" . This kit is needed for the proper R&R of the metal-clad rubber mount bushings of the rear Axle carrier sub frame. Incorporating a thrust bearing to ease the pulling/pushing action, reduces the wear and tear of the tool, ensuring longevity. This Bushing Master Kit comes complete with all the proper components to efficiently get the job done right. Comes equipped with a 14mm threaded rod and press nut. |
|
PEL-TOL-3026 | Rear Sub-frame Bushing Master Kit, BMW Service Tool Reference #33-3-110, fits BMW Chassis E23, E24, E28, E30, E32, E34, E36 318ti (Compact) Models only, Z3 Coupe/Roadster [More Info] | $394.00 |  |
| Press Arbor Kit/Outer Ball Joint |
| Designed for the proper removal and installation of the outer ball joints. Comes complete with all the components to perfectly mate up to the factory ball joints. Must be used in conjunction with a hydraulic press. |
|
PEL-TOL-3038 | Press Arbor Kit, BMW E30 3 Series [More Info] | $175.60 | |
| Separator |
| Designed for the proper disassembly of the pitman arm type tie rod ends w/o tearing the ball joint boots. |
|
PEL-TOL-266H | Separator, Universal, 18mm opening [More Info] | $46.20 | |
| Heavy Duty Separator |
| Designed for the proper disassembly of ball joints on drag links and tie rods. Base of opening is 21.5mm |
|
PEL-TOL-3029 | Heavy Duty Separator, Universal, 21.5mm opening [More Info] | $83.10 | |
| Heavy Duty Extractor |
| Designed for the proper disassembly of ball joints from lower wishbone. Base of opening is 25.5mm |
|
PEL-TOL-3030 | Heavy Duty Separator, Universal, 25.5mm opening [More Info] | $92.40 | |
| Pin Wrench Socket |
| Needed for R&R of the threaded ring retaining nut on the strut tower/shock absorber. |
|
PEL-TOL-3014 | Pin Wrench Socket, BMW All [More Info] | No Longer Available | |
| Coil Spring Compressor |
| Needed for R&R of coil springs on MacPherson strut type assemblies. This unit incorporates safety retaining pins to completely grab hold of the coils ensuring a No Slip Grip! |
|
PEL-TOL-MP100 | Coil Spring Compressor, BMW All [More Info] | No Longer Available | |
Suspension Books |
| No matter what job you are performing, you can never have enough knowledge. We've compiled a list of great suspension and handling books for you to read up on while you're trying to figure out exactly how to configure your BMW's suspension. Some books may be special order. |
|
| Carroll Smith's Engineer In Your Pocket |
| "A Practical Guide to Tuning the Race Car Chassis and Suspension" Store all the answers in your hip pocket! This handy pocket guide written by racing professional Carroll Smith suggests realistic solutions to common race car handling problems. Formatted listings of causes and possible effects, and problems and possible causes. 32 pages, spiral-bound. |
|
BK-129569 | Carroll Smiths Engineer In Your Pocket [More Info] | $14.50 | |
