| BMW E21 Clutch & Flywheel - Page 4 |
Clutch Tools |
| You can never perform a good job on repairing your BMW if you don't have the right tool. A lot of people try to cut corners because they either don't have the tool they need, or they don't even know that it exists! Having the right tool for the job saves time, money, and wasted effort. A job that can take 4 hours without the right tool, can take a mere few minutes. You're already saving lots of money by doing the work yourself, spend some money and get the tool that you need. Once it's in your collection, you will not know how you got along without it! |
|
| Torx Female Socket Set |
| These odd-shaped sockets are required to remove some of the bolts that connect the engine to the transmission. Seven sizes E-6 through E-16. The three smaller sizes are 1/4" drive; the four larger sizes are 3/8" drive. Made of heat-treated alloy steel. Sockets are kept in a convenient vinyl holder. Includes External Torx Sockets: E6, E7, E8, E10, E12, E14, and E16. |
|
TOL-LIS26750 | Torx Female Socket Set [More Info] | $20.25 |  |
| Pilot Bearing Puller |
| Designed to extract bearings and bushings with an I.D. of 12mm up to 15mm. |
|
PEL-TOL-1088 | Pilot Bearing Puller, BMW All Models, Each [More Info] | $52.90 | |
| Clutch Disc Alignment Tools |
| Needed to properly center the clutch disc when doing a clutch job. |
|
PEL-TOL-CABW | Clutch Disc Alignment Tool (Spline count = 10; Pilot diameter = 11.9 mm; Spline diameter = 28.5 mm), Fits BMW M10, M20, M30 engines with 12mm ID pilot bearings only [More Info] | $8.45 | |
PEL-TOL-T183 | Clutch Disc Alignment Tool (Spline count = 10; Pilot diameter = 14.9 mm; Spline diameter = 28.6 mm), Fits BMW M42, M44, M50, S50, S52, M60, M62 engines with 15mm ID pilot bearings only [More Info] | $8.45 | |
| Mityvac Brake Bleeder Kit |
| Tired of sucking up bad tasting brake fluid? Tired of bleeding your brakes using the old fashioned method of bribing a family member to stomp on the pedal? Try a vacuum bleeder. This system sucks fluid through the brake lines and eliminates all air bubbles from a normal system. Also very useful is our Pelican Technical Article on Bleeding Porsche Brakes. |
|
MTVC-001 | Mityvac Brake Bleeder Kit [More Info] | $36.95 | |
| Power Bleeders |
This innovative brake bleeding device utilizes a hand pump to pressurize the brake fluid system for an easy one-person operation. A small gauge on the front of the brake fluid reservoir indicates pressure. The very large reservoir can hold about two quarts of brake fluid - more than enough for most brake flushing and bleeding jobs. The bleeder is a very useful and cost-effective tool to have in your collection. A pressure bleeder is much better than a vacuum-style bleeder because it will not cause bubbles to form in your brake lines. All bleeders come with a full 1 year warranty.
Don't forget to click here to check out our Pelican Technical Article on Bleeding Porsche Brakes. |
|
| EUROPEAN POWER BLEEDER - Works on most European cars, including Alfa Romeo, Audi, BMW, Fiat, Mercedes, Peugeot, Porsche, Renault, SAAB, Volkswagen, Volvo, and all other cars with 45mm threaded hydraulic fluid reservoir caps. Comes with everything you need to bleed your hydraulic brake or clutch system. |
|
PEL-0100 | European Power Bleeder Kit, BMW All [More Info] | $51.95 | |
| BLACK LABEL EUROPEAN POWER BLEEDER - Features a custom-machined aluminum cap and deluxe swivel fitting. Comes with an extra length of high grade poly urethane tubing that won't cloud or crack with exposure to brake fluid. Works on most European cars, including Alfa Romeo, Audi, BMW, Fiat, Mercedes, Peugeot, Porsche, Renault, SAAB, Volkswagen, Volvo, and all other cars with 45mm threaded hydraulic fluid reservoir caps. |
|
PEL-0109 | Black Label European Power Bleeder Kit, BMW All [More Info] | $69.95 | |
| UNIVERSAL POWER BLEEDER - Works on most import and domestic cars, including most Honda, Mazda, Mitsubishi, Nissan, Toyota, and Subaru. Also fits all other cars with a round hydraulic fluid reservoir smaller than 3.5 inches across, including most late model GM, FORD, and Chrysler vehicles. Comes with everything you need to bleed your hydraulic brake or clutch system. |
|
PEL-0101 | Universal Power Bleeder Kit (European cars please refer to: PEL-0100) [More Info] | $59.95 | |
| UNIVERSAL ADAPTER KIT - comes with everything you need to convert your European POWER BLEEDER to work on most imported cars, including Honda, Mazda, Mitsubishi, Nissan, Toyota, and Subaru. Also fits all other cars with a round hydraulic fluid reservoir smaller than 3.5 inches across, including most late model GM, FORD, and Chrysler vehicles. |
|
PEL-1101 | Universal Adapter Kit [More Info] | $26.95 | |
| BLEEDER BOTTLES - Motive Products' bleeder bottles feature a stainless lanyard to hold the bottle to a suspension component and a return nipple to prevent spills. Sold in sets of 2. |
|
PEL-1820 | Bleeder Bottle Set (2 included) [More Info] | $22.95 | |
