|  | | | BMW E21 Clutch & Flywheel - Page 3 | Clutch Master/Slave Cylinders and Related Parts | | Clutch Hose | 
21-52-1-120-306-M33 | Fluid Hose, Clutch Master Cylinder to Slave Cylinder, 320i/is (1976-83), Each
Brand: FTE-FAG [Photo] |  |
| $44.25 |  | Flywheels and Related Parts  | | The flywheel has essentially three functions in your engine. First, it is used to balance the rotating mass of the crankshaft and pistons. Second to provide the starter with a gear to rotate the engine when you are starting the car. Third, it is used to provide the clutch disc with a surface to catch to, thereby transferring power from the engine, through the clutch assembly then out to the transmission. Over time, flywheels can come out of round, due to wear and age. If you need a new flywheel, we here at Pelican can provide you with a new unit. Also, whenever you remove the flywheel, always replace the flywheel bolts for extra insurance. You don't want to know how much damage broken flywheel bolts can cause. I have seen flywheels break off in quarter-mile drag cars, come up through the bellhousing, into the passenger compartment, and injuring the driver. |
| | Flywheels | | 11-22-1-270-292-BOE | Flywheel, 320i/is (1976-09/82), Each
Brand: Genuine BMW | $313.25 | | | 11-22-1-278-932-BOE | Flywheel, 320i/is (09/82-83), Each
Brand: Genuine BMW | $314.50 | | | Flywheel Bolts | 
11-22-0-616-143-M9 | Flywheel Bolt, 12x22mm, 8 Per Car, 320i/is (1976-83), Each
Brand: Genuine BMW [Photo] | |
| $5.25 | | | Flywheel Dowel Pins | | 11-22-1-744-338-BOE | Flywheel Dowel Pin, 3 Per Car, 320i/is (1976-83), Each
Brand: Genuine BMW | $7.25 | | Brake Fluid | | Até is the best brake fluid in the business. The unique blue color allows you to see when you have finished flushing out your entire system of old brake fluid. Plus, it's blue, so it's just plain cooler than ordinary fluid. |
| 
706302-M4 | ATE Super Blue Brake Fluid, 1 Liter
Brand: Ate [Photo] | |
| $16.25 | | Clutch Tools | | You can never perform a good job on repairing your BMW if you don't have the right tool. A lot of people try to cut corners because they either don't have the tool they need, or they don't even know that it exists! Having the right tool for the job saves time, money, and wasted effort. A job that can take 4 hours without the right tool, can take a mere few minutes. You're already saving lots of money by doing the work yourself, spend some money and get the tool that you need. Once it's in your collection, you will not know how you got along without it! |
| | Torx Female Socket Set | | These odd-shaped sockets are required to remove some of the bolts that connect the engine to the transmission. Seven sizes E-6 through E-16. The three smaller sizes are 1/4" drive; the four larger sizes are 3/8" drive. Made of heat-treated alloy steel. Sockets are kept in a convenient vinyl holder. Includes External Torx Sockets: E6, E7, E8, E10, E12, E14, and E16. |
| 
TOL-LIS26750 | Torx Female Socket Set [Photo] | $16.50 | | | Clutch Wear Gauge | | This tool allows you to check the thickness of the clutch disc without having to remove the transmission |
| 
PEL-TOL-3004 | Clutch Wear Gauge, BMW All Models (1975-on), Each [Photo] | $20.20 | | | Pilot Bearing Puller | | Designed to extract bearings and bushings with an I.D. of 12mm up to 15mm. |
| 
PEL-TOL-1088 | Pilot Bearing Puller, BMW All Models, Each [Photo] | $55.00 | |
| |
|
|
|
