| BMW E21 Tools - Page 5 |
Suspension Tools |
| Bushing Adapter Kit |
| No need to disassemble the whole rear end in order to use a hydraulic press with this tool. Designed to work in conjunction with a C-clamp. This kit is used for removal and installation of the rear A-arm metal clad support bushings. |
|
PEL-TOL-3027 | Bushing Adapter Kit, BMW, Models with 44mm bushings ONLY, (1982-95) [Photo] | $44.50 |  |
| Separator |
| Designed for the proper disassembly of the pitman arm type tie rod ends w/o tearing the ball joint boots. Base of opening is 18mm |
|
PEL-TOL-266H | Separator, 18mm, BMW, All Models [Photo] | $48.00 | |
| Heavy Duty Separator |
| Designed for the proper disassembly of ball joints on drag links and tie rods. Base of opening is 21.5mm |
|
PEL-TOL-3029 | Heavy Duty Separator, 21.5mm, BMW, All Models [Photo] | $77.70 | |
| Heavy Duty Separator |
| Designed for the proper disassembly of ball joints from lower wishbone. Base of opening is 25.5mm |
|
PEL-TOL-3030 | Heavy Duty Separator, 25.5mm, BMW, All Models [Photo] | $95.80 | |
| Pin Wrench Socket |
| This tool is used in order to remove or install the threading ring that secures the front strut into the strut housing. |
|
PEL-TOL-3014 | Pin Wrench Socket, BMW, All E3, E9, E21, E23, E28, E30, E32 And E34 Models, Each [Photo] | No Longer Available | |
| Coil Spring Compressor |
| Needed for R&R of coil springs on Macpherson strut type assemblies. This unit incorporates safety retaining pins to completely grab hold of the coils ensuring a No Slip Grip! |
|
PEL-TOL-MP100 | Coil Spring Compressor, BMW, All Models, Each [Photo] | No Longer Available | |
Transmission Tools |
| Transmission Bearing Extractors |
| These bearing extractors are used to pull bearings out of the BMW transmission when doing a rebuild. |
|
PEL-TOL-242 | Transmission Bearing Extractor Master Kit (contains all extractors listed below), Each [Photo] | $566.10 | |
| PEL-TOL-242A | Transmission Bearing Extractor, For 44.50 to 41.50mm sized bearings, Each | $68.80 | |
| PEL-TOL-242B | Transmission Bearing Extractor, For 37 to 35mm sized bearings, Each | $68.80 | |
| PEL-TOL-242C | Transmission Bearing Extractor, For 41.50 to 38.50mm sized bearings, Each | $68.80 | |
| PEL-TOL-242E | Transmission Bearing Extractor, For 40.50 to 38.50mm sized bearings, Each | $68.80 | |
| PEL-TOL-242F | Transmission Bearing Extractor, For 42.50 to 40.50mm sized bearings, Each | $68.80 | |
| PEL-TOL-242G | Transmission Bearing Extractor, For 43.50 to 41mm sized bearings, Each | $68.80 | |
| PEL-TOL-242H | Transmission Bearing Extractor, For 32 to 30mm sized bearings, Each | $68.80 | |
| PEL-TOL-242I | Transmission Bearing Extractor, For 48 to 45.50mm sized bearings, Each | $68.80 | |
