| BMW E21 Tools - Page 3 |
Engine Tools |
| Valve Adjusters |
| This neat little tool is spring loaded for easy use and allows you to turn the valve adjustment eccentric while you are adjusting your valves. |
|
TOL-3013 | Valve Adjuster, All BMW Engines with Eccentric Style Valve Adjustment, Each [Photo] | $21.60 |  |
Fuel Injection Tools |
| You can never perform a good job on repairing your BMW if you don't have the right tool. A lot of people try to cut corners because they either don't have the tool they need, or they don't even know that it exists! Having the right tool for the job saves time, money, and wasted effort. A job that can take 4 hours without the right tool, can take a mere few minutes. You're already saving lots of money by doing the work yourself, spend some money and get the tool that you need. Once it's in your collection, you will not know how you got along without it! |
|
| Oxygen Sensor Removal Tool |
| Are you having trouble removing the oxygen sensor? Many times, it is not possible to get a wrench or socket around the sensor due to it's location in the exhaust. Once again, Pelican has your answer. This special tool allows you to remove the oxygen sensor using a standard 3/8" drive ratchet, simplifying an otherwise difficult job. |
|
PEL-4491B | Oxygen Sensor Removal Tool, 22mm, 3/8" drive [Photo] | $23.00 | |
| Digital Air/Fuel Ratio Meter |
The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meters digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. - Patented Direct Digital Wideband Technology
- Wideband O2 Compatible with ALL fuel types
- Single or Dual Channel Version Available
- OBD-II Scan tool- read/clear DTCs and log up to 16 channels of CAN OBD-II Data
- Log directly to SD card (included)
- Playback log data on screen and/or with powerful LogWorks software (included)
- Large high-contrast graphics LCD
- Built-in RPM converter (direct frequency or with optional inductive clamp)
- 4 fully-differential analog inputs
- 2 configurable linear analog outputs
- Positive lock connectors for all connections
- Innovate MTS serial IN and OUT
- USB connection to your PC
The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user.
The LM-2 Kit (Single Wideband O2) includes the LM-2 meter, Bosch wide-band oxygen sensor, 10 ft sensor cable, cigarette-lighter power adapter, analog in/out cable, ODB-II/CAN interface cable, SD memory card, USB cable for PC connection, weld-in bung and plug, LogWorks software CD, and quick-start guide. Carrying Case also included!
More accessories for your LM-1 available here.
For permanently installed tuning solutions, click here.
Manufacturer: Innovate Motorsports
Click here to visit the manufacturer's home page. |
|
INN-3806 | Innovate Motorsports LM-2: Digital Air/Fuel Ratio Meter [Photo] [Photo] | $479.00 | |
Ignition Tools |
| Bosch Spark Plug Gapping Tool |
| Ever begin a tune up and you always forget the all-important gapping tool? Never Again! |
|
PEL-PP802037 | Bosch Spark Plug Gapping Tool [Photo] | No Longer Available | |
| Magnetic Spark Plug Socket |
| Ever drop a spark plug into the depths of the engine bay because your tool failed to firmly grasp the spark plug? This magnetic socket solves the problem once and for all! |
|
PEL-PP802038 | Magnetic Spark Plug Socket - 13/16" [Photo] | $58.40 | |
| Swivel Spark Plug Socket |
TOL-SK4490 | 3/8"-Drive 13/16" Swivel Spark Plug Socket [Photo] | $24.00 | |
| Jacobs Plug Gapping Tool |
| A specially made set of pliers that accurately and consistently gaps spark plugs with the outer electrode perfectly perpendicular to the center electrode every time! |
|
PEL-PP802060 | Jacobs Plug Gapping Tool [Photo] | No Longer Available | |
| MSD Timing Lights |
The MSD Timing Light is built using solid state circuitry and uses a unique SCR (silicon controlled rectifier) that provides accurate and stable timing signals from 0 to 8000 rpm. The MSD Timing Light is equipped with a high output Linear Xenon flash tube and a focused fresnel lens to produce a light that is bright enough for use on the sunniest of days. A shock absorbing rubber nose cone is also added to protect the lens. This rugged timing light is built to last in rough environments. A six foot lead with a heavy duty inductive metal pickup that can be attached to the spark plug wire in any direction is supplied with the timing light for easy hookup. The MSD Timing Light can be used on all engines with standard or capacitive discharge ignition systems
An accurate timing light is extremely important to the performance of your engine. MSDs new Self-Powered Timing Light is a tool every performance tuner should have. A great feature of the Self-Powered Timing Light is that it does not require 12 volts. This means less wires are hanging over the engine compartment and makes for quick, easy checks. For power, the Light uses six AAA batteries. The lightweight assembly is injection molded for great durability and produces an intense strobe that is easy to view through 5,000 rpm. The inductive pickup is detachable for easy storage. |
|
PEL-MSD8990 | MSD Timing Light [Photo] | $144.95 | |
PEL-MSD8991 | MSD Self Powered Timing Light [Photo] | $269.95 | |
