| BMW E21 Tools - Page 2 |
Clutch Tools |
| Pilot Bearing Puller |
| Designed to extract bearings and bushings with an I.D. of 12mm up to 15mm. |
|
PEL-TOL-1088 | Pilot Bearing Puller, BMW All Models, Each [Photo] | $55.00 |  |
| Clutch Disc Alignment Tools |
| Needed to properly center the clutch disc when doing a clutch job. |
|
PEL-TOL-CABW | Clutch Disc Alignment Tool, Fits BMW M10, M20, M30 engines with 12mm ID pilot bearings only [Photo] | $8.45 | |
| PEL-TOL-T183 | Clutch Disc Alignment Tool, Fits BMW M42, M44, M50, S50, S52, M60, M62 engines with 15mm ID pilot bearings only | $8.45 | |
| Mityvac Brake Bleeder Kit |
| Tired of sucking up bad tasting brake fluid? Tired of bleeding your brakes using the old fashioned method of bribing a family member to stomp on the pedal? Try a vacuum bleeder. This system sucks fluid through the brake lines and eliminates all air bubbles from a normal system. Also very useful is our Pelican Technical Article on Bleeding Porsche Brakes. |
|
MTVC-001 | Mityvac Brake Bleeder Kit [Photo] | $36.95 | |
Engine Tools |
| Universal Oil Seal Extractors |
| This oil seal extractor allows you to safely remove oil seals from components such as crankshafts, camshafts and just about anywhere else there is an oil seal that needs replacing. It's universal style design allows it to be used on not only BMW's but other cars as well. |
|
TOL-3019 | Universal Oil Seal Extractor, All BMW Engines, Each [Photo] | No Longer Available | |
| Oil Seal Arbors |
| This tool is used to properly install the oil seal on the pulley side of the crankshaft on BMW engines. Be sure to order the correct tool for your application |
|
TOL-3001 | Oil Seal Arbor Kit, For M10 and M30 Engines, Each [Photo] | No Longer Available | |
| Engine Turning Bars |
| These handy engine turning bars are used to rotate the engine using the timing chain. A great tool to have if you are setting the timing on your car or adjusting the valves. |
|
TOL-3015 | Engine Turning Bar, For All BMW 4 and 6 Cylinder Engines With a Single Timing Chain, Each [Photo] | $79.30 | |
| Timing Chain Crimping Tools |
This tool is used in order to crimp together the master link of your BMW's timing chain.
NOTE: Must be used in conjunction with adapter bit #TOL-M-0050-B (sold separately). |
|
TOL-M-0050-SIR | Timing Chain Crimping Tool, Adaptor Bit Not Included, All BMW Engines With Timing Chains, Each [Photo] | $149.00 | |
TOL-M-0050-B | Timing Chain Crimping Tool Adaptor Bit, For All BMW Timing Chains, Each [Photo] | $40.40 | |
