| BMW E21 Main Engine Components - Page 4 |
Piston Pin/Connecting Rod Bushings |
| These bushings are used to support and secure the piston pin inside the piston, and hold it to the connecting rod. Always replace these bushings whenever you are doing a rebuild of your engine. |
|
11-24-0-618-100-M41 | Connecting Rod Bushing, 320i/is (1976-83) As Needed, Each
Brand: Glyco [Photo] |  |
| $3.25 |  |
Piston Pin Snap Rings  |
| These small snap rings are used to secure the piston pin in place on the connecting rod. Replace them whenever you are rebuilding your engine. It is cheap insurance against massive engine damage. |
|
| 07-11-9-934-460-BOE | Piston Pin Snap Ring, 320i/is (1976-83) As Needed, Each
Brand: Genuine BMW | $0.75 | |
Engine Tools |
| Universal Oil Seal Extractors |
| This oil seal extractor allows you to safely remove oil seals from components such as crankshafts, camshafts and just about anywhere else there is an oil seal that needs replacing. It's universal style design allows it to be used on not only BMW's but other cars as well. |
|
TOL-3019 | Universal Oil Seal Extractor, All BMW Engines, Each [Photo] | No Longer Available | |
| Oil Seal Arbors |
| This tool is used to properly install the oil seal on the pulley side of the crankshaft on BMW engines. Be sure to order the correct tool for your application |
|
TOL-3001 | Oil Seal Arbor Kit, For M10 and M30 Engines, Each [Photo] | No Longer Available | |
| Engine Turning Bars |
| These handy engine turning bars are used to rotate the engine using the timing chain. A great tool to have if you are setting the timing on your car or adjusting the valves. |
|
TOL-3015 | Engine Turning Bar, For All BMW 4 and 6 Cylinder Engines With a Single Timing Chain, Each [Photo] | $79.30 | |
| Timing Chain Crimping Tools |
This tool is used in order to crimp together the master link of your BMW's timing chain.
NOTE: Must be used in conjunction with adapter bit #TOL-M-0050-B (sold separately). |
|
TOL-M-0050-SIR | Timing Chain Crimping Tool, Adaptor Bit Not Included, All BMW Engines With Timing Chains, Each [Photo] | $149.00 | |
TOL-M-0050-B | Timing Chain Crimping Tool Adaptor Bit, For All BMW Timing Chains, Each [Photo] | $40.40 | |
| Valve Adjusters |
| This neat little tool is spring loaded for easy use and allows you to turn the valve adjustment eccentric while you are adjusting your valves. |
|
TOL-3013 | Valve Adjuster, All BMW Engines with Eccentric Style Valve Adjustment, Each [Photo] | $21.60 | |
