| BMW E21 Cylinder Head & Valvetrain - Page 3 |
Valve Cover Gaskets |
| These gaskets should be replaced every time that you adjust your valves. |
|
| Valve Cover Gaskets |
| 11-12-1-734-276-M17 | Valve Cover Gasket, 320i/is (1976-83), Each
Brand: Victor Reinz [Photo] |  |
| $8.75 |  |
| Valve Cover Nuts |
11-61-7-549-043-M9 | Valve Cover Nut, 320i/is (1976-83), As Needed, Each
Brand: Genuine BMW [Photo] | |
| $4.50 | |
Head Gasket Sets |
| Head Gasket Sets |
11-12-1-734-031-M17 | Head Gasket Set, 320i (09/79-83), Each
Brand: Victor Reinz [Photo] | |
| $61.25 | |
| 11-12-9-065-724-M30 | Head Gasket Set, 320i (1976-08/78), Each
Brand: Elring Klinger | |
| $64.75 | |
| Head Gaskets |
09-0922-111-M30 | Head Gasket with Cutting Rings (1.50 mm), 320i/is (1976-83), Each
Brand: Elring Klinger [Photo] | |
| $64.00 | |
11-12-1-734-279-M17 | Head Gasket (1.50 mm), 320i/is (1976-83), Each
Brand: Victor Reinz [Photo] | |
| $16.75 | |
11-12-1-734-280-M17 | Head Gasket, +0.3 mm (1.80 mm), 320i/is (1976-83), Each
Brand: Victor Reinz [Photo] | |
| $26.75 | |
| Head Gasket Sealing Compound |
11-12-1-262-571-M30 | Head Gasket Sealing Compound
Brand: Elring Klinger [Photo] | |
| $9.50 | |
Intake Manifold Gaskets |
| These are the various gaskets that seal the BMW intake system. Replace them whenever you remove any intake components. Good intake gaskets are crucial for proper running of your car. If you have leaks, it can cause the car to run improperly, and possibly cause engine damage. |
|
11-61-1-727-994-M17 | Intake Manifold Gasket, Use With Gasket 11-61-1-727-995-M17, 3 Per Car, 320i/is (1976-83), Each
Brand: Victor Reinz [Photo] | |
| $1.75 | |
| 11-61-1-727-995-M17 | Intake Manifold Gasket, Use With 3 Of Gasket 11-61-1-727-994-M17, 1 Per Car, 320i/is (1976-83), Each
Brand: Victor Reinz [Photo] | |
| $2.00 | |
11-61-1-730-742-M17 | Intake Manifold Gasket For Lower Plenum Tube, One Per Cylinder, 320i (1976-08/79), Each
Brand: Victor Reinz [Photo] | |
| $1.75 | |
Exhaust Manifold Gaskets |
| These are the various gaskets that seal the BMW exhaust system. Replace them whenever you remove any exhaust components. Keeping your exhaust components sealed is vital to keep your car running correctly. |
|
11-62-1-723-878-M17 | Exhaust Manifold Gasket For Cars Without Thermal Reactor, 4 Per Car, 320i/is (1976-83), Each
Brand: Victor Reinz [Photo] | |
| $2.25 | |
11-75-1-723-842-M17 | Exhaust Manifold Gasket For Cars With Thermal Reactor, 4 Per Car, 320i/is (1976-08/79), Each
Brand: Victor Reinz [Photo] | |
| $2.25 | |
