| BMW Z8 - Clutch & Flywheel - Page 1 |
| Like practically everything else on your car, clutches and flywheels wear according to how they are operated - the harder you drive, the sooner it will need service. Flywheels may last longer than clutches, so be sure to have a reputable machinist resurface it if you plan to reuse it. Some drivers prefer heavier duty clutch assemblies for sporting applications, and we are happy to provide those upgrades as well. Keep in mind that stronger clutches may require more pedal effort and do not always last as long, so choose your clutch according to what your needs are. |
|
Clutch Kit |
| This kit contains all the needed parts required to replace the clutch assembly on your car. |
|
21-21-7-515-146-M37 | Clutch Kit Contains: (1) Disc (1) Pressure Plate (1) Release Bearing NOTE: Proper installation requires clutch and disc to be installed on the flywheel before removal of shipping plate. To remove plate must use: (1) CT 1012 Tool, Z8
Brand: Luk [Photo] |  |
| $374.75 |  |
Clutch Disc - Manual |
| The clutch disc is part of the clutch assembly. It is a friction disc the transfers power from the engine, through the clutch assembly, then to the transmission. |
|
88-1864-978-M38 | Clutch Disc "Sport" 240 mm, Z8 NOTE:Flywheel must be modified before disc can be installed.
Brand: Sachs [Photo] | |
| $736.25 | |
Clutch Pressure Plate |
| The pressure plate is used to mechanically engage or disengage the clutch disc from the engine's flywheel, allowing you to change gears. |
|
88-3082-791-M38 | Clutch Pressure Plate "Sport" 240 mm, Z8
Brand: Sachs [Photo] | |
| $610.25 | |
| Clutch Bolt |
|
07-11-9-901-023-M9 | Bolt Clutch Pressure Plate to Flywheel 8 X 16 mm (6 Per Car), Z8
Brand: Genuine BMW [Photo] | |
| $1.00 | |
Clutch Release Bearing |
| This bearing is used along with the pressure plate to mechanically engage or disengage the clutch disc inside the clutch assembly. |
|
| Clutch Release Bearing, Z8 |
21-51-1-223-582-M38 | Clutch Release Bearing, Z8
Brand: Sachs [Photo] | |
| $57.75 | |
| 21-51-7-521-360-M40 | Clutch Release Bearing, Z8
Brand: INA | |
| $66.75 | |
Clutch Release Bearing Arm |
21-51-1-223-302-M9 | Fork Lever for Clutch Release Bearing, Z8
Brand: Genuine BMW [Photo] | |
| $18.25 | |
Clutch Arm Pivot Ball/Pin |
21-51-1-223-328-M200 | Pivot Pin for Clutch Fork Lever, Z8
Brand: MTC [Photo] | |
| $1.50 | |
Clutch Release Arm Spring |
21-51-7-570-284-M9 | Fork Lever Spring for Release Bearing Fork, Z8 Z8
Brand: Genuine BMW [Photo] | |
| $4.75 | |
Clutch Master Cylinder |
| The clutch master cylinder is used to hydraulically operate the engagement and disengagement of the clutch. |
|
21-52-6-758-822-M33 | Clutch Master Cylinder NOTE: Also use- (1) 61 31 6 905 900 clutch switch (1) 61 11 6 911 072 adapter lead, Z8
Brand: FTE-FAG [Photo] | |
| $70.25 | |
