| BMW Z3 Coupe 2.8 - Clutch & Flywheel - Page 1 |
| Like practically everything else on your car, clutches and flywheels wear according to how they are operated - the harder you drive, the sooner it will need service. Flywheels may last longer than clutches, so be sure to have a reputable machinist resurface it if you plan to reuse it. Some drivers prefer heavier duty clutch assemblies for sporting applications, and we are happy to provide those upgrades as well. Keep in mind that stronger clutches may require more pedal effort and do not always last as long, so choose your clutch according to what your needs are. |
|
Pilot Bearing |
| The pilot bearing is used to center the mainshaft of the transmission in the flywheel assembly. Always replace this bearing whenever you remove the flywheel. |
|
| Pilot Bearing 15 X 32 X 10, Z3 Coupe 2.8 |
11-21-1-720-310-M40 | Pilot Bearing 15 X 32 X 10, Z3 Coupe 2.8
Brand: INA [Photo] |  |
| $6.75 |  |
11-21-1-720-310-M296 | Pilot Bearing 15 X 32 X 10, Z3 Coupe 2.8
Brand: NTN [Photo] | |
| $9.75 | |
Flywheel Bolt |
| These bolts are used to secure the flywheel to the engine's crankshaft. Whenever the flywheel is removed, is it recommended you replace these bolts, as old bolts can stretch and lose strength if they are reused. |
|
11-22-2-243-051-M9 | Flywheel Bolt (12 X 50 mm) Manual Transmission (8 Per Car), Z3 2.8 Coupe
Brand: Genuine BMW [Photo] | |
| $3.00 | |
| 11-22-7-805-885-M9 | Flywheel Bolt (12 X 28 mm), Z3 Coupe 2.8 Auto Trans(8 Per Car)
Brand: Genuine BMW | |
| $3.50 | |
Flywheel |
| The Flywheel is used to provide the clutch disc with a surface to engage, thereby sending power through the clutch and out to the transmission. |
|
21-21-7-512-474-M37 | Dual-Mass Flywheel 240 mm for 5 Speed Manual Trans. NOTE: Not for cars with SMG or 6 speed manual transmission., Z3 Coupe 2.8 from 09/98
Brand: Luk [Photo] | |
| $763.50 | |
Clutch Installation Tool |
| CT-1011-M37 | Clutch Installation Tool for Self Adjusting Clutches. NOTE: This tool is used as a flywheel pilot bearing guide during removal of the shipping plate., Z3 Coupe 2.8
Brand: Luk [Photo] | |
| $17.25 | |
Clutch Kit |
| This kit contains all the needed parts required to replace the clutch assembly on your car. |
|
21-21-7-515-141-M37 | Clutch Kit Contains: (1) Disc (1) Pressure Plate (1) Release Bearing NOTE: Proper installation requires clutch and disc to be installed on the flywheel before removal of shipping plate. To remove plate must use: (1) CT 1011 Tool, Z3 Coupe 2.8
Brand: Luk [Photo] | |
| $303.50 | |
Clutch Disc - Manual |
| The clutch disc is part of the clutch assembly. It is a friction disc the transfers power from the engine, through the clutch assembly, then to the transmission. |
|
88-1864-943-M38 | Clutch Disc "Sport" 240 mm Rigid Sintered Plate with Metallic Linings 4 Puck Style, Z3 2.8 Coupe thru 08/98
Brand: Sachs [Photo] | |
| $515.25 | |
88-1864-954-M38 | Clutch Disc "Sport" 240 mm Rigid Plate with Organic Racing Linings, Z3 2.8 Coupe thru 05/00
Brand: Sachs [Photo] | |
| $519.00 | |
Clutch Pressure Plate |
| The pressure plate is used to mechanically engage or disengage the clutch disc from the engine's flywheel, allowing you to change gears. |
|
88-3082-791-M38 | Clutch Pressure Plate "Sport" 240 mm, Z3 2.8 Coupe
Brand: Sachs [Photo] | |
| $618.50 | |
