| BMW Z3 Coupe 2.8 - Main Engine Components - Page 2 |
Flywheel |
| Flywheel Bolt |
| These bolts are used to secure the flywheel to the engine's crankshaft. Whenever the flywheel is removed, is it recommended you replace these bolts, as old bolts can stretch and lose strength if they are reused. |
|
11-22-2-243-051-M9 | Flywheel Bolt (12 X 50 mm) Manual Transmission (8 Per Car) NOTE: Only for cars with dual-mass flywheel., Z3 2.8 Coupe
Brand: Genuine BMW [More Info] |  |
| $4.50 |  |
11-22-7-805-885-M9 | Flywheel Bolt (12 X 28 mm), Z3 Coupe 2.8 Auto Trans(8 Per Car)
Brand: Genuine BMW [More Info] | |
| $4.50 | |
Pilot Bearing |
| The pilot bearing is used to center the mainshaft of the transmission in the flywheel assembly. Always replace this bearing whenever you remove the flywheel. |
|
| Pilot Bearing 15 X 32 X 10, Z3 Coupe 2.8 |
11-21-1-720-310-M40 | Pilot Bearing 15 X 32 X 10, Z3 Coupe 2.8
Brand: INA [More Info] | |
| $7.75 | |
11-21-1-720-310-M296 | Pilot Bearing 15 X 32 X 10, Z3 Coupe 2.8
Brand: NTN [More Info] | |
| $11.00 | |
Crankshaft Seal Housing Gasket |
11-14-1-432-240-M17 | Gasket Rear Crankshaft Seal Housing, Z3 Coupe 2.8
Brand: Victor Reinz [More Info] | |
| $1.75 | |
Crankshaft/Oil Pump Seal |
| This seal at the front and the rear of the crankshaft works to keep oil in the crankcase. |
|
| Crankshaft Seal Front 48 X 65 X 10, Z3 Coupe 2.8 |
| 11-14-2-249-532-M104 | Crankshaft Seal Front 48 X 65 X 10, Z3 Coupe 2.8
Brand: Corteco_CFW [More Info] | |
| $14.00 | |
11-14-2-249-532-M17 | Crankshaft Seal Front 48 X 65 X 10, Z3 Coupe 2.8
Brand: Victor Reinz [More Info] | |
| $5.50 | |
|
11-14-2-249-533-M104 | Crankshaft Seal Rear 90 X 110 X 12 NOTE: This new style seal does not have a tension spring., Z3 Coupe 2.8
Brand: Corteco_CFW [More Info] | |
| $23.50 | |
Locating Dowel |
11-11-1-743-118-M9 | Locating Dowel 14.5 mm Diameter (Solid ring type), Z3 Coupe 2.8
Brand: Genuine BMW [More Info] | |
| $3.00 | |
11-12-1-726-238-M9 | Locating Dowel 10.5 mm Diameter, Z3 Coupe 2.8
Brand: Genuine BMW [More Info] | |
| $3.00 | |
11-12-1-726-243-M9 | Locating Dowel 13.5 mm Diameter, Z3 Coupe 2.8
Brand: Genuine BMW [More Info] | |
| $3.00 | |
Tools |
| If you are opting to save money by working on your car yourself, it is a very wise investment to have the proper tools. Some tasks may be nearly impossible to perform without the specific tool designed to assist you in the process. Don't cheap out - you're saving money by doing it yourself. Do it right with the right tools. Some tools may be special order, and may take a few days to be shipped out. |
|
| Flare Nut Wrench Set |
| Use the right tool for the job, whether it's replacing or tightening a solid fuel line or even changing out your fuel filter and check valve. Made from SK's high polish SuperKrome finish, that protects the tools from the harsh working environments found in today's workplace, while providing long life and maximum corrosion resistance |
|
TOL-SK376 | 6 Piece SuperKrome Metric Flare Nut Wrench Set [More Info] | $89.00 | |
TOL-SK378 | 6 Piece SuperKrome Metric 15 degree Offset Flare Nut Wrench Set [More Info] | $92.00 | |
