| BMW Z3 2.5i - Steering System - Page 2 |
Steering Angle Sensor |
37-14-6-781-436-M9 | Steering Angle Sensor for Dynamic Steering Control NOTE: Uncoded Part, Z3 2.5i
Brand: Genuine BMW [Photo] |  |
| $206.50 |  |
Steering Column Parts |
| Steering Column Bushing |
32-31-1-158-835-M9 | Steering Shaft Bushing (Plastic), Z3 2.5
Brand: Genuine BMW [Photo] | |
| $11.25 | |
Steering Lock Parts |
| Steering Column Lock Cover Seal |
32-32-1-094-182-M9 | O-Ring for Ignition Ring and Steering Column Trim, Z3 2.5i
Brand: Genuine BMW [Photo] | |
| $0.75 | |
| Steering Lock Body |
32-32-1-095-825-M9 | Steering Lock Housing for Manual Transmission without Tumbler and Ignition Switch, Z3 2.5i
Brand: Genuine BMW [Photo] | |
| $146.25 | |
| Steering Lock Bolt |
32-31-1-157-967-M9 | Fracture Bolt for Ignition Lock (2 Per Car), Z3 2.5i
Brand: Genuine BMW [Photo] | |
| $2.00 | |
| Steering Lock Grub Screw |
32-30-1-159-449-M9 | Grub Screw for Steering Lock (2 Per Car), Z3 2.5i
Brand: Genuine BMW [Photo] | |
| $2.75 | |
Steering Lock Parts |
Steering Wheels |
One of the best ways to spice up the interior of your car is with a high-quality after-market steering wheel. Replace that dull and boring factory wheel with one covered with fine Italian leather from either Momo or Sparco. The leaders in Steering wheels and gearshift knobs, both Momo and Sparco offer unparalleled Italian quality. With hundreds of wheel adapters, you can pick out the steering wheel that's just perfect for your car or truck. Matching shift knobs and pedal sets from Momo and Sparco are also available.
Click here to browse our selection of Steering Wheels! |
|
Alignment Tools |
| Whether your simply doing your own work, or trying to tune your car up for the track, our offering of special alignment tools will help you to find the absolute best setup for your 911. |
|
| Precision Camber Alignment Tool |
The SmartCamber tool digitally measures camber and caster quickly, easily, and repeatably. With the push of a button it automatically compensates for non-level floors so it can be used at home, at the track...even on a trailer with complete confidence. Plus, the module is removable and can be used for measuring any angles including drive shaft, wing and suspension angles, so it is really two tools in one. Accurately measures in 1/10th of a degree increments. Most effectively used with the optional Hands-Free adapter (as shown in second photo) because it allows the tool to be attached to the wheel while suspension adjustments are made - fast, accurate and super easy. Beats the heck out of using an $18,000 alignment rack!
Optional Wooden Carrying Case: Hand made lacquered birch plywood box with specially designed anchor screws to hold the tool in place. Very high quality and made in up-state New York by skilled craftsmen. |
|
PEL-SR1030 | SmartCamber Alignment Tool (12in to 18in wheels) [Photo] | $245.95 | |
PEL-SR1040 | SmartCamber Handsfree Adapter [Photo] | $316.95 | |
| Laser Toe-in Alignment Plates |
| People have been asking for an affordable, yet highly accurate toe measuring tool for years. Finally, someone came up with an idea that is based on the original "toe plates" method, where two plates that lean against the tire and then, with a tape measure, toe is measured. It is a system that is better than nothing, but has real limitations. For example, body and suspension parts are always in the way making accurate measuring troublesome and inaccurate. With the new Laser Toe Plates, the same principle is applied, but an extremely precise laser beam is shot just 14mm above the ground, reflecting back to a target. With an adjusting knob, the laser is guided to the target and once hit, you simply read the dial indicator (its readings are in minutes of a degree; a handy conversion chart for minutes to decimal is included). It also tells you if you have toe-in or toe-out. Completely portable and extremely accurate. |
|
PEL-SR4522 | Laser Toe-in Alignment Plates [Photo] | $581.45 | |
