| BMW Z3 2.8 - Clutch & Flywheel - Page 1 |
| Like practically everything else on your car, clutches and flywheels wear according to how they are operated - the harder you drive, the sooner it will need service. Flywheels may last longer than clutches, so be sure to have a reputable machinist resurface it if you plan to reuse it. Some drivers prefer heavier duty clutch assemblies for sporting applications, and we are happy to provide those upgrades as well. Keep in mind that stronger clutches may require more pedal effort and do not always last as long, so choose your clutch according to what your needs are. |
|
Pilot Bearing |
| The pilot bearing is used to center the mainshaft of the transmission in the flywheel assembly. Always replace this bearing whenever you remove the flywheel. |
|
| Pilot Bearing 15 X 32 X 10, Z3 2.8 |
11-21-1-720-310-M40 | Pilot Bearing 15 X 32 X 10, Z3 2.8
Brand: INA [More Info] |  |
| $7.75 |  |
11-21-1-720-310-M296 | Pilot Bearing 15 X 32 X 10, Z3 2.8
Brand: NTN [More Info] | |
| $11.00 | |
Flywheel Bolt |
| These bolts are used to secure the flywheel to the engine's crankshaft. Whenever the flywheel is removed, is it recommended you replace these bolts, as old bolts can stretch and lose strength if they are reused. |
|
11-22-2-243-051-M9 | Flywheel Bolt (12 X 50 mm) Manual Transmission (8 Per Car) NOTE: Only for cars with dual-mass flywheel., Z3 2.8
Brand: Genuine BMW [More Info] | |
| $4.50 | |
11-22-7-805-885-M9 | Flywheel Bolt (12 X 28 mm), Z3 2.8 Auto Trans(8 Per Car)
Brand: Genuine BMW [More Info] | |
| $4.50 | |
Flywheel |
| The Flywheel is used to provide the clutch disc with a surface to engage, thereby sending power through the clutch and out to the transmission. |
|
21-21-1-223-599-M37 | Dual-Mass Flywheel 240 mm, Z3 2.8 thru 08/98
Brand: Luk [More Info] | |
| $610.50 | |
21-21-7-512-474-M37 | Dual-Mass Flywheel 240 mm for 5 Speed Manual Trans. NOTE: Not for cars with SMG or 6 speed manual transmission., Z3 2.8 from 09/98
Brand: Luk [More Info] | |
| $687.75 | |
Clutch Installation Tool |
| CT-1011-M37 | Clutch Installation Tool for Self Adjusting Clutches. NOTE: This tool is used as a flywheel pilot bearing guide during removal of the shipping plate., Z3 2.8 from 09/98
Brand: Luk [More Info] | |
| $16.25 | |
Clutch Kit |
| This kit contains all the needed parts required to replace the clutch assembly on your car. |
|
21-21-1-223-602-M38 | Clutch Kit Contains: (1) Disc (1) Pressure Plate (1) Release Bearing, Z3 2.8 thru 08/98
Brand: Sachs [More Info] | |
| $307.00 | |
21-21-7-515-141-M37 | Clutch Kit Contains: (1) Disc (1) Pressure Plate (1) Release Bearing NOTE: Proper installation requires clutch and disc to be installed on the flywheel before removal of shipping plate. To remove plate must use: (1) CT 1011 Tool, Z3 2.8 from 09/98
Brand: Luk [More Info] | |
| $309.00 | |
Clutch Release Bearing |
| This bearing is used along with the pressure plate to mechanically engage or disengage the clutch disc inside the clutch assembly. |
|
21-51-7-521-471-M38 | Clutch Release Bearing, Z3 2.8
Brand: Sachs [More Info] | |
| $40.50 | |
Clutch Release Bearing Arm |
21-51-1-223-302-M9 | Fork Lever for Clutch Release Bearing, Z3 2.8
Brand: Genuine BMW [More Info] | |
| $20.50 | |
