| BMW Z3 2.8 - Gauges & Miscellaneous - Page 1 |
| Electrical problems are often called "gremlins" because they can be extremely hard to find and love to eat after midnight. The smallest component can fail and sometimes cause other problems, so fix the problem now and be sure to use the correct OEM parts available here. |
|
Air Temperature Sensor |
| Sensor - Air Temperature |
| This sensor measures air temperature and send the information to the fuel injection control unit. |
|
| Air Temperature Sensor, Z3 2.8 |
13-62-1-739-510-M85 | Air Temperature Sensor, Z3 2.8
Brand: Facet [More Info] |  |
| $16.50 |  |
13-62-1-739-510-M375 | Air Temperature Sensor, Z3 2.8
Brand: AB Elektronik [More Info] | |
| $25.25 | |
| Engine Temperature Sensor/Sender |
| This sensor is used with the Bosch CIS fuel injection system and is used to sense water temperature. |
|
13-62-1-433-076-M323 | Temperature Sensor for Water Temperature, Oil Temperature and SMG Transmission Temperature, Z3 2.8 from 9/98 Water & Oil
Brand: FAE [More Info] | |
| $9.75 | |
13-62-1-703-993-M323 | Temperature Switch Double Temperature Switch Located in the Cylinder Head or Water Pump 4 Prong Connector, Z3 2.8 thru 08/98 Cyl. Head
Brand: FAE [More Info] | |
| $13.25 | |
| Sensor - Knock/Ping |
| The Knock Sensor is used to inform the ignition computer of pre-ignition or detonation inside the cylinders, and adjust the timing curve accordingly. |
|
12-14-1-703-276-M177 | Knock Sensor (Ping Sensor), Z3 2.8 thru 08/98
Brand: Siemens [More Info] | |
| $70.25 | |
| Sensor - Oil Level |
| The oil level sender is used to measure the oil level in your engine, then send a electrical signal to the oil light or oil pressure gauge, indicating the current oil level. |
|
| Engine Oil Level Sensor, Z3 2.8 from 09/98 |
| 12-61-7-508-003-M253 | Engine Oil Level Sensor, Z3 2.8 from 09/98
Brand: APA [More Info] | |
| $45.25 | |
12-61-7-508-003-M44 | Engine Oil Level Sensor, Z3 2.8 from 09/98
Brand: Hella [More Info] | |
| $106.75 | |
|
| Oxygen Sensor |
| The oxygen sensor measures exhaust gases, then sends a signal to the fuel injection control unit to set the correct fuel air mixture for the engine to run correctly. If the oxygen sensor fails, it can cause rough running and poor fuel economy. |
|
11-78-1-427-884-M209 | Oxygen Sensor Length = 990 mm, Z3 2.8 thru 08/98- (1) after catalyst
Brand: NTK [More Info] | |
| $99.50 | |
11-78-1-433-071-M209 | Oxygen Sensor Length = 410 mm, Z3 2.8 thru 08/98- (1) before catalyst
Brand: NTK [More Info] | |
| $104.75 | |
11-78-1-433-940-M14 | Oxygen Sensor Length = 990 mm, Z3 2.8 from 09/98- (2) after catalyst
Brand: Bosch [More Info] | |
| $96.75 | |
11-78-1-742-050-M14 | Oxygen Sensor Length = 320 mm, Z3 2.8 from 09/98- (2) before catalyst
Brand: Bosch [More Info] | |
| $84.00 | |
| Position Sensor - Camshaft |
|
12-14-1-703-221-M177 | Position/RPM Sensor Camshaft, Z3 2.8 thru 08/98
Brand: Siemens [More Info] | |
| $77.00 | |
| Position/RPM Sensor Camshaft, Z3 2.8 from 09/98 for (1) Exhaust Camshaft |
12-14-7-518-628-M58 | Position/RPM Sensor Camshaft, Z3 2.8 from 09/98 for (1) Exhaust Camshaft
Brand: OEM [More Info] | |
| $35.75 | |
12-14-7-518-628-M9 | Position/RPM Sensor Camshaft, Z3 2.8 from 09/98 for (1) Exhaust Camshaft
Brand: Genuine BMW [More Info] | |
| $132.25 | |
|
| Position/RPM Sensor Intake Camshaft, Z3 2.8 from 09/98 |
12-14-7-539-165-M58 | Position/RPM Sensor Intake Camshaft, Z3 2.8 from 09/98
Brand: OEM [More Info] | |
| $57.50 | |
12-14-7-539-165-M9 | Position/RPM Sensor Intake Camshaft, Z3 2.8 from 09/98
Brand: Genuine BMW [More Info] | |
| $132.25 | |
