| BMW Z3 1.9 - Oil Circulation - Page 2 |
Engine Oil Dipstick O-Ring |
| The oil dipstick seal is used to hold the dipstick in it's holder. On some cars this seal is crucial to keep the fuel injection system working correctly by maintaining a vacuum in the crankcase. |
|
11-43-1-287-541-M17 | O-Ring Oil Dip Stick Tube to Oil Pan 14.5 X 3, Z3 1.9
Brand: Victor Reinz [More Info] |  |
| $1.25 |  |
11-43-1-717-666-M17 | O-Ring for Oil Dip Stick 9 X 2.2, Z3 1.9
Brand: Victor Reinz [More Info] | |
| $0.50 | |
Oil Pan Gasket |
| This gasket seals the oil pan to the engine block. |
|
11-13-1-739-813-M17 | Oil Pan Gasket (Engine), Z3 1.9
Brand: Victor Reinz [More Info] | |
| $9.00 | |
Engine Oil Cooler Bracket |
17-20-1-712-210-M9 | Oil Cooler Pipe Bracket NOTE: Quantity per car varies by production date and model. Verify quantity on car before ordering., Z3 1.9 (4 Per Car)
Brand: Genuine BMW [More Info] | |
| $2.25 | |
Spacer Sleeve |
| Engine Oil Cooler Mounting Grommet |
17-22-7-798-686-M9 | Spacer Sleeve for Oil Cooler Bracket, Z3 1.9 (2 Per Car)
Brand: Genuine BMW [More Info] | |
| $4.75 | |
Oil System Tools |
| You can never perform a good job on repairing your Porsche if you don't have the right tool. A lot of people try to cut corners because they either don't have the tool they need, or they don't even know that it exists! Having the right tool for the job saves time, money, and wasted effort. A job that can take 4 hours without the right tool, can take a mere few minutes. You're already saving lots of money by doing the work yourself, spend some money and get the tool that you need. Once it's in your collection, you will not know how you got along without it! |
|
| Super Oil Drain Pan/Storage Container |
| This container can hold up to 15 quarts and includes a very tight lid that allows the pan to double as a storage container. Simply empty your oil, then stand it upright, and carry it off to your local recycling center. It really couldn't be any simpler. |
|
PEL-PP801095 | Super Oil Drain Pan [More Info] | $15.00 | |
| Flex-tube Oil Spout |
| One of the neatest products around is the Flex-tube Oil Spout. This tube attaches to most containers and allows you to accurately position the mouth of the tube exactly where you want it to be located. |
|
| PEL-PM883056 | Flex-tube Oil Spout [More Info] | No Longer Available | |
Motor Oil & Additives |
| Lubro Moly Oil Additives and Cleaners |
| Lubro Moly MotorProtect Engine Treatment. Fully synthetic oil additive. It significantly reduces wear. High pressure wear protection additives form a very thin film on all mating partners in the engine, that is compliant and very slippery under wear conditions. The film lasts up to 50.000 km. This results in the following advantages: Significant wear reduction, Longer engine life, Reduction of fuel consumption and pollutant levels thanks to the anti-friction effect, Superior engine performance, quiet operation. For more information, see the Liqui-Moly Website. |
|
2053-M19 | Lubro Moly Motor Protect Engine Treatment, 500ml bottle [More Info] | |
| $24.00 | |
| Lubro Moly MO2 Motor Oil Friction Treatment. The anti-friction lubricant MoS2 forms a highly load-resistant lubricating film on all rubbing and sliding surfaces. It reduces friction and guarantees easier running of the engine. As a result there are the following advantages: significant reductions in fuel and oil consumption, scientifically proven wear reduction of more than 50%, fewer break-downs, and emergency running properties. Tested for catalytic converters and turbochargers. |
|
2009-M19 | Lubro Moly M02 Motor Oil Friction Treatment, 300ml/can [More Info] | |
| $6.50 | |
| Lubro Moly MO2 Transmission Friction Treatment. An additive specially developed for manual gearboxes, differentials, and steering units with oil bath. It reduces wear significantly and lowers peak operating temperatures: quieter operation, easier shifting, better running in. The gearbox runs quietly and warms up less. Even older gearboxes regain running smoothness and performance thanks to the "repair" of the gear surfaces. Increases operating safety and provides emergency running properties through the MoS2. |
|
2019-M19 | Lubro Moly MO2 Transmission Friction Treatment, 50g [More Info] | |
| $8.25 | |
