| BMW Z3 1.9 - Main Engine Components - Page 1 |
| If you're this far into your engine, then we think you know what you're doing. You also probably know that the best parts to use are OEM quality parts that already lasted this long. The stronger your bottom end, the stronger everything else can be, so don't skimp on these core components. |
|
Main Bearing Set |
| The main bearings are used to hold the crankshaft inside the engine block and to provide the crankshaft with proper lubrication. This set includes the main bearings. Please specify if you need standard or oversize bearings. |
|
11-21-1-706-847-4CYL-M41 | Main Bearing Set Standard, Z3 1.9
Brand: Glyco [More Info] |  |
| $97.50 |  |
| Main Bearing Cap Bolt |
|
11-11-1-735-525-M9 | Main Bearing Cap Bolt 10 X 75 mm, Z3 1.9 (10 Per Car)
Brand: Genuine BMW [More Info] | |
| $8.50 | |
Rod Bearing Set |
| These bearings are used on the connecting rods inside the car's engine. When rebuilding your engine, be sure to specify if you need standard size or oversize bearings. |
|
11-24-1-284-849-4CYL-M41 | Rod Bearing Set Standard 45.00 mm, Z3 1.9
Brand: Glyco [More Info] | |
| $36.25 | |
Engine Gasket Set |
| This gasket set includes the various seals and gaskets needed when rebuilding the lower end of the car's engine. |
|
| 11-11-1-743-981-M17 | Engine Gasket Set for Engine Block, Z3 1.9
Brand: Victor Reinz [More Info] | |
| $73.25 | |
Wrist Pin Bushing |
| This bushing is used where the piston connects to the connecting rod. |
|
11-24-1-278-209-M41 | Wrist Pin Bushing, Z3 1.9 (4 Per Car)
Brand: Glyco [More Info] | |
| $5.00 | |
Connecting Rod Bolt |
| These bolts hold the two pieces of the connecting rod together. Always replace these nuts when you are doing an engine rebuild. |
|
11-24-1-739-728-M9 | Connecting Rod Bolt Length 44 mm, Z3 1.9 (8 Per Car)
Brand: Genuine BMW [More Info] | |
| $4.50 | |
Flywheel |
| The Flywheel is used to provide the clutch disc with a surface to engage, thereby sending power through the clutch and out to the transmission. |
|
21-21-1-223-550-M37 | | $618.75 | |
| Flywheel Bolt |
| These bolts are used to secure the flywheel to the engine's crankshaft. Whenever the flywheel is removed, is it recommended you replace these bolts, as old bolts can stretch and lose strength if they are reused. |
|
11-22-2-243-051-M9 | Flywheel Bolt (12 X 50 mm) Manual Transmission (8 Per Car) NOTE: Only for cars with dual-mass flywheel., Z3 1.9
Brand: Genuine BMW [More Info] | |
| $4.50 | |
11-22-7-805-885-M9 | Flywheel Bolt (12 X 28 mm), Z3 1.9 Auto Trans(8 Per Car)
Brand: Genuine BMW [More Info] | |
| $4.50 | |
