Order Online or Call:  
888-280-7799  
HACKER SAFE certified sites prevent over 99.9% of hacker crime.
  Search our site:   

View Cart  | Project List | Order Status |  Help    

 
- Back to Catalog -
Sensor - Oil Level
Sender - Oil Pressure Gauge
Engine Oil Filter Kit
Engine Oil Drain Plug
Oil Filter Canister 0-Ring
Engine Oil Filter Cover
Oil Pump & Parts
Oil Pump Bolt
Engine Oil Pump Sprocket Retainer
Engine Oil Pump Chain
Oil Pump Sprocket
Engine Oil Filler Cap
Crank Case Ventilation O-Ring
Engine Oil Dipstick O-Ring
Engine Oil Pan
Oil Pan Gasket
Oil Separator
Oil Separator Hose
Engine Oil Cooler Parts
Engine Oil Cooler Line O-Ring
Engine Oil Cooler Mounting Grommet
Engine Oil Cooler Bracket
Engine Oil
FilterMag
Oil System Tools
Super Oil Drain Pan/Storage Container
Flex-tube Oil Spout
Motor Oil & Additives
Lubro Moly Motor Oil
Lubro Moly Oil Additives and Cleaners
Swepco Motor Oil Additives
- Back to Catalog -
Home >  BMW X5 4.6is (2001-03)Engine >   BMW X5 4.6is - Oil Circulation  
BMW X5 4.6is - Oil Circulation - Page 3

Engine Oil Cooler Parts

Engine Oil Cooler Line O-Ring

11-42-1-702-905-M17

O-Ring for Oil Cooler Line 14.0 X 2.0, X5 4.6is
   Brand: Victor Reinz    [Photo]

$0.50
Engine Oil Cooler Mounting Grommet

17-22-7-798-686-M9

Spacer Sleeve for Oil Cooler Bracket, X5 4.6is (1 Per Car)
   Brand: Genuine BMW    [Photo]

$3.25

Engine Oil Cooler Bracket


17-20-1-712-210-M9

Oil Cooler Pipe Bracket NOTE: Quantity per car varies by production date and model. Verify quantity on car before ordering., X5 4.6IS (2 Per Car)
   Brand: Genuine BMW    [Photo]

$1.00

Engine Oil

Motor Oil High Performance Oil SAE 5W-30 Synthetic, X5 4.6is

07-51-0-017-866-M9

Motor Oil High Performance Oil SAE 5W-30 Synthetic, X5 4.6is
   Brand: Genuine BMW    [Photo]

$7.75

07-51-0-017-866-M750

Motor Oil High Performance Oil SAE 5W-30 Synthetic, X5 4.6is
   Brand:     [Photo]

$9.25

FilterMag    Camera Pic

Snap one on today! FilterMAG achieves the next evolution in magnetic lubricant filtration. FilterMag's patented technology can withstand the force of oil flow and retains contaminants of all sizes, even smaller than 2 microns. Is 2 microns small? Normal table salt is 100 microns in size.

Your current oil filter can only trap particles that are 25 microns and larger. Every 2 1/2 seconds, one quart of oil flows through an engine's oil filter. Oil filter manufacturers don't want you to know that abrasive wear accounts for about 90% of failures due to contamination and 70% of all engine wear and sludge is caused by contaminants not trapped and held by your typical automotive oil filter.
The patented design of focusing rare earth magnet energy into an oil filter is very much like a laser focuses light. Depending on the filter size and usage FilterMAG focuses from 110 to over 1000 pounds of magnetic energy to the filter.

What is a rare earth magnet? All metallic elements with an atomic number between 57 and 71 are classified as rare earth. These rare earth magnets can produce more than 4,100 surface gauss in a tube magnet circuit compared to 1,000 and 2,000 gauss for standard Alnico and Ceramic magnet. (Gauss is a unit measuring electromagnetic force.) FilterMag's rare earth magnets are generally 5 to 10 times stronger than other magnetic filtration devices using Ceramic magnets. The newest generation of rare earth magnets consists of neodymium iron boron. (Neodymium is number 60 on the periodic table.)

What makes the FilterMAG system work? The FilterMAG's outer cover or flux band insures direct contact with the filter and by placing the magnet segments directly on the flux band, circuits the magnetism to drastically increases the magnetic energy by redirecting the power back into the oil filter and not back into the surrounding air. The heart of FilterMAG patented design system starts with unique precision ground and arced Neodymium magnets aligned in North and South series to generate the greatest amount of force to trap and hold metal particles out of the oil flow.

Just install the reusable FilterMAG on your new oil filter and consider FilterMAG as life insurance for your vehicle.

Industry tests found that removing particles 15 microns in size reduced abrasive wear by 70%. These tests also confirm that removal of particles down to 2 microns virtually stops the abrasion wear cycle. Isn't it time to make your oil filter really work?

BBFM-SS250

FilterMAG, 2.50 to 2.75 inch Filter Size, 110lbs pull force.     [Photo]

$35.75

BBFM-SS300

FilterMAG, 2.90 to 3.40 inch Filter Size, 150lbs pull force.    [Photo]

$47.95

BBFM-SS365

FilterMAG, 3.50 to 3.90 inch Filter Size, 275lbs pull force.     [Photo]

$49.95

BBFM-RA365

FilterMAG, 3.40 to 4.25 inch Filter Size, 525lbs pull force.     [Photo]

$143.92

BBFM-RA450

FilterMAG, 4.25 to 5.50 inch Filter Size, 1,000lbs pull force.     [Photo]

$173.00

Oil System Tools

You can never perform a good job on repairing your Porsche if you don't have the right tool. A lot of people try to cut corners because they either don't have the tool they need, or they don't even know that it exists! Having the right tool for the job saves time, money, and wasted effort. A job that can take 4 hours without the right tool, can take a mere few minutes. You're already saving lots of money by doing the work yourself, spend some money and get the tool that you need. Once it's in your collection, you will not know how you got along without it!
Super Oil Drain Pan/Storage Container
This container can hold up to 15 quarts and includes a very tight lid that allows the pan to double as a storage container. Simply empty your oil, then stand it upright, and carry it off to your local recycling center. It really couldn't be any simpler.

PEL-PP801095

Super Oil Drain Pan    [Photo]

$15.00
Flex-tube Oil Spout
One of the neatest products around is the Flex-tube Oil Spout. This tube attaches to most containers and allows you to accurately position the mouth of the tube exactly where you want it to be located.

PEL-PM883056

Flex-tube Oil Spout    [Photo]

$6.85

  Page 3 of 4  <1234>

        

  Search our site:   

View Cart & CheckOut | Project List | Order Status |  Help    

 

[Home] [Customer Service] [Shopping Cart] [Project/Wish List]
  [Privacy Statement]  [Contact Us] [About Us] [Shipping]

Copyright © 2008, Pelican Parts Inc.