| BMW X5 4.4i M62 - Cylinder Head & Valvetrain - Page 2 |
Cylinder Head Hardware |
| Cylinder Head Bolt Set |
| This set includes all the bolts needed when replacing a cylinder head. Since cylinder head bolts can stretch, we recommend that you replace the head bolts every time the head is removed. |
|
11-12-1-729-246-M17 | Cylinder Head Bolt Set (10 Bolts Per Set) (2 Per Car), X5 4.4 M62
Brand: Victor Reinz [Photo] |  |
| $19.00 |  |
| Cylinder Head Washer |
| These washers are used with the cylinder head bolts. Always use new washers and bolts when re-installing the cylinder head to prevent broken bolts or incorrect torque settings. |
|
11-12-7-550-856-M9 | Cylinder Head Washer for Cylinder Head Bolts, X5 4.4i M62 (20 Per Car)
Brand: Genuine BMW [Photo] | |
| $0.75 | |
Engine Intake Valve |
| The intake valve is used to allow the fuel/air mixture to enter the cylinder during the intake stroke. It is a good idea to use new valves if you are rebuilding the cylinder head. |
|
11-34-1-435-480-M154 | Intake Valve 35.0 mm (6 mm Stem) (16 Per Car), X5 4.4 M62
Brand: Intervalves [Photo] | |
| $13.75 | |
Engine Exhaust Valve |
| The exhaust valve is used to expel exhaust gases from the engine during the exhaust stroke. It is a good idea to use new valves if you are rebuilding the cylinder head. |
|
11-34-1-435-482-M154 | Exhaust Valve 30.5 mm (6 mm Stem) (16 Per Car), X5 4.4 M62
Brand: Intervalves [Photo] | |
| $23.75 | |
Valve Guide |
| The valve guide keeps the intake or exhaust valve lubricated inside the cylinder head. |
|
11-12-1-735-533-M105 | Valve Guide I.D. 6 mm (12.56 mm) 43 mm in Length (32 Per Car), X5 4.4 M62
Brand: Canyon [Photo] | |
| $5.75 | |
Engine Valve Keeper |
| The valve keepers are the small pieces that keep the valve from dropping into the cylinder. |
|
11-34-1-461-405-M80 | Valve Keeper for 6 mm Valve Stems, X5 4.4 M62 (64 Per Car)
Brand: TRW [Photo] | |
| $1.50 | |
Valve Stem Seal Kit |
| This kit contains the parts needed to replace the valve stem seals in your car's engine. |
|
11-34-9-063-193-M42 | Valve Stem Seal Kit (2 Kits Per Car), X5 4.4 M62
Brand: Goetze [Photo] | |
| $11.25 | |
Engine Valve Lifter |
11-32-1-440-256-M40 | Hydraulic Valve Lifter for Intake/Exhaust Valves, X5 4.4 M62 (32 Per Car)
Brand: INA [Photo] | |
| $20.75 | |
Valve Spring Retainer |
11-34-1-432-453-M9 | Valve Spring Retainer (Upper Spring Plate), X5 4.4 M62 (32 Per Car)
Brand: Genuine BMW [Photo] | |
| $5.25 | |
