Order Online or Call:  
888-280-7799  
HACKER SAFE certified sites prevent over 99.9% of hacker crime.
  Search our site:   

View Cart  | Project List | Order Status |  Help    

Home > Tools > Brake Tools >  Brake Tools

1 7/8" Light Truck Adapter Set $420.80
• Fits 1-7/8" arborsManufacturer: AMMCO   Click here to visit the manufacturer's home page ... more...  

Rear Caliper Bushing Kit $55.15
This is the approved method of servicing seized four wheel disc brake rear caliper slides on GM W-body cars: the bushing driver (No. 49012) attaches to your air hammer to remove the frozen... more...  

Deluxe Brake Washer $726.27
• OSHA preffered method• Low pressure pneumatic pump• Compressed air supply filter and coalescing filter maximize pump life• 3-stage filtration of brake cleaning solution• Reusable oil absorbent... more...  

Brake Drum Mic 6" to 16.125" $249.20
• Range: 6" To 16.125"• Graduations: 0.005"Manufacturer: AMMCO   Click here to visit the manufacturer's home page ... more...  

Brake Retaining Tool For Compacts $6.45
Remove and install retaining springs 5/8 to 11/16" in diameter on small car drum brakes. Small socket fits into tight places. Special socket grips retainer washer. Push and turn to remove... more...  

Universal Brake Retaining Spring Tool $7.00
Double-ended tool removes and installs small and large car drum brake retaining springs. Tool fits sized 5/8 to 11/16" and 11/16 to 7/8" diameter. Special sockets grip retaining washers... more...  

Pedal Depressor /Steering Wheel Holder $28.80
• Holds the steering wheel, brake pedal, accelerometer or clutch pedal in a desired position• Saves time and money by eliminating the need for two technicians to do the job• Easy to assemble... more...  

Hand Bearing Packer $19.55
Self-contained bearing packer saves time and can be used anywhere. No air line or grease gun required. Packs 50 to 60 bearings without refilling. Transparent, impact resistant cup allows... more...  

Bendix Drum Brake Spring Tool $7.00
Tool removes and installs return spring on Bendix drum brakes. To use, place socket end over spring anchor and twist to remove. Hook notched end through spring and over the post, then... more...  

Brake Shoe Retaing Spring Tool $7.30
Tool removes and installs retaining springs 11/16 to 7/8" in diameter. Special socket grips retaining washer. Push and turn to remove or install.Manufacturer: KD TOOLS   ... more...  

Brake Adjusting Tool $4.85
Tool adjusts clearance between drum brake and brake shoe. It fits through a slot in the backing plate and turns the star wheel in many drum brakes.Manufacturer: KD TOOLS   ... more...  

Drum Brake Adjusting Tool $6.70
Tool adjusts clearance between drum brake and brake shoe. It fits through a slot in the backing plate and turns the star wheel. Ends of tool are offset for hard-to-reach areas on small... more...  

Cv Joint Boot Band Wrench $14.77
Use wrench to securely fasten Band-it style free end clamps, roll band and clips or Band-it Jr. style pre-formed CV Boot Clamps. The tool is used by turning the winding mandrel with a 1... more...  

Brake Resetting Gauge $36.10
This quality tool is used to set the proper clearance between brake lining and drum prior to assembly. Inside calipers measure drum diameters and outside calipers transfer measurement to... more...  

Torx Brake Cylinder Wrench $3.50
Tool removes two E8 Torx® bolts that hold the wheel cylinder on the backing plate. Angled, offset design allows easy access to the two bolts hidden behind the shock assembly. Slip-on vinyl... more...  

Disc Brake Piston Tool Set $70.86
• For Rotating Pistons Back into the Caliper to Provide Clearance for New Pads.Includes 5 adapters (available individually) for use in both 2 and 4-wheel rear disc brake assemblies of most... more...  

Brake Hone $12.34
• Brake cylinder hone with three 240 grit stones fits cylinders from 27/32" to 2"• Flexible shaft designed to be driven by variable speed drill.• Controlled pressure makes it possible to... more...  

Rear Disc Brake Piston Tool $10.00
Rotates piston back into the caliper when replacing rear brake pads. This six sided tool now fits more applications. Fits most domestic and some import applications. Push and turn tool to... more...  

Import Car Brake Clip Tool $8.33
Designed for import cars with brake shoe hold-down clips. Removes and install the brake clip and nail on brake shoes in seconds. Set tool head in the brake clip groove. Push tool to depress... more...  

Parking Brake Cable Remover $10.84
Double ended tool will quickly remove parking brake cables from brake backing plate and the chassis mounting bracket. Cylindrical tool ends compress prongs on the spring fastener for easy... more...  

GM Single Spring Brake Tool $16.70
Several larger, late model GM cars use the heavy single brake spring. The spring tension must be released to disassemble the brake to replace brake shoes, emergency brake cable, or service... more...  

Brake Spoon $4.55
Speeds star wheel brake adjustment. Insert tool through slot in backing plate. Different angle at each end adapts to various makes and models.Manufacturer: LISLE   Click here... more...  

Flaring Tool Set $275.69
• Fabricates push connect flares found on transmission cooler, fuel and some brake lines as well as fabricates 45° and double flare flares.• Production quality flaring is made easy with... more...  

Universal Flaring Tool Kit Push-Connect $370.00
This kit fabricates Push Connect Flare: 1/4", 5/16" and 3/8"; GM Fuel Line Flare: 5/16", and 3/8"; Flare/Double Flare 3/16", 1/4", 5/16", 3/8" and 1/2" and Metric Bubbble Flaring 4.75mm... more...  

7pc Brake Tool Set $21.73
• Convenient grouping of many commonly needed brake toolsIncludes:5/16" Brake spring tool (3/4" diameter)9-3/4" Brake spring tool8-1/2" Brake bleeder wrench (5/16" & 3/8" hex box ends)9... more...  

11pc Disc Brake Caliper Tool $52.67
• Rotates piston back into caliper for fitment of new brake shoes• Works on many models from these manufacturers: Mercedes, BMW, VW, GM, Audi, Ford, Honda, Subaru, Mazda, Nissan, Mitsubishi... more...  

Disc Brake Pad Spreader $7.55
For installing pads on most domestic and import cars and light trucks. Compresses disc brake piston for easy pad installation. A must have for any brake job!Manufacturer: LISLE  ... more...  

Disc Brake Pad Spreader $28.85
No longer must disc brake pad installation be difficult. The No. 7034 fits between the two new pads being installed, then expands to retract the piston. Leaves both hands free to start... more...  

Brake Caliper Pin Remover $14.00
The damage-free way to remove brake caliper pins on 1986-88 Aerostars, Broncos and E- and F-series pickups; 1983-88 Rangers; and 1984-88 Bronco IIs.Manufacturer: OTC DIVISION OF SPX CORP... more...  

Live Center Forcing Screw Plug
This plug replaces the existing center forcing screw on the No. 7248 C-frame to allow its use on heavy-duty ball joints. The 7917's shorter overall length gives the C-frame a wider opening... more...  

Ford Valve Spring Tool $100.80
Compresses valve springs for quicker, easier camshaft, valve seal, valve spring or retainer service-because you don't have to remove the head from the engine first! It's an OEM-approved... more...  

Toyota 4WD Hub Locknut Wrench $65.04
Toyota's front wheel bearing design change requires a new procedure to remove the locknut: The free wheel hub assembly's locknut is on the inside, so the hub must be removed to gain access... more...  

GM V6 Oil Leak Repair Tool $65.04
On certain GM V-6 engines, the oil pump drive is difficult to get at, making it a real hassle to remove it to repair O-ring leaks. This tool removes the oil pump drive from the engine without... more...  

GM Crankshaft Sensor Remover $32.05
• Removes crankshaft sensor on GM V-6 applications.• Works on 1987-1989 2.6L V-6, 199-1994 3.1L V-6, 1994-newer 3100 V-6• Made in the USAManufacturer: OTC DIVISION OF SPX CORP  ... more...  

Brake Equalizer Test Kit $215.56
• Eliminates costly comebacks!• Quickly pinpoint: Unusual pad wear, brake pull, imploded/clogged hoses, sticking/frozen calipers and slides.• Simply insert the gauge load cells in place... more...  

Brake Drum Gauge 6" to 14.25" $155.39
• Pre-inspects scored brake drums• Determines if they can be safely machined• Features inch and metric scalesSpecifications:Range: 6-14.25", 150-360mmGraduations: 1/32", 1mm ... more...  

2.25" Digital Disc Brake Gauge $371.34
• Digital accuracy - Swiss electronics give reading in both inch and metric• Pointed anvils measure scored and unscored surfaces• Built-in depth rod to check brake pad and shoe wear• Fractional... more...  

6" to 22" Brake Drum Gauge $212.82
• Pointed contacts ? Determines if drum can be safely machined • Inch/Metric scales ... more...  

Deep Throat Disc Brake Mic 0.3" to 1.3" $110.60
• Specifically designed for modern type rotors - extra deep frame• Easier to measure across entire braking surface• Extra hard measuring surfaces - pointed anvils• Simplified zero adjustment... more...  

Brake Return Spring Tool $7.75
Designed for import car drum brake return springs. The tool removes and installs return springs. Also works on domestic brakes that don't use an anchor pin. Engage brake spring tool head... more...  

4WD Spindle Nut Wrench $33.95
Four-lug wrench removes spindle nuts on 4-wheel drive vehicles. It features uniquely designed lugs for maximum strength. Use with 1/2" square drive tool. Will work on Ford vehicles with... more...  

1/2"-Drive 1 15/16" Tie Rod Socket $29.60
Hex Size: 1 3/8" x 3/4" U Shape OpeningLength (inch.): 2.25SureGrip® Hex Design: The patented SureGrip® hex design drives the side of the fastener not the corner. This not only provides... more...  

3/4"-Drive Ball Joint Socket $28.79
• Improved Coating: The black coating retains more rust preventative compound than black oxide.Manufacturer: SK HAND TOOLS / FACOM   Click here to visit the manufacturer's... more...  

FWD Front Hub Installer $36.35
The 7135 ensures proper installation of spline halfshafts that are interference fit into the front hub on Escort/Lynx Tempo/Topaz and Taurus/Sable cars.Manufacturer: OTC DIVISION OF SPX... more...  

Front Wheel Bearing Lock Nut Wrench $30.06
Applications: 1973-1981 GM 3/4 and 1 ton 4WD trucks.Manufacturer: OTC DIVISION OF SPX CORP   Click here to visit the manufacturer's home page ... more...  

15pc Master Ball Joint Adapters $257.15
This set was created specifically to expand the capability of your OTC7249 ball joint service tool set. It includes all the receiver tubes and removing/installing adapters needed to work... more...  

Ford 2WD Van Ball Joint Adapter $120.55
This set is designed to remove and install both original equipment and aftermarket press-fit upper and lower ball joints. Fits most of Ford's 1992-97 2WD 3/4 and 1-ton vans.Manufacturer... more...  

GM 4WD Ball Joint Adapter Set $75.63
Use this set with your No.7249 ball joint service tool set to service GM's 1996 and newer 4WD 1/2 and 3/4 ton pickups, Suburbans and Yukons/Tahoes. Easily remove or install either aftermarket... more...  

4WD Ball Joint Adapter Set $87.02
This kit is used with ball joint service kit No. 7249 to remove and install upper and lower ball joints on 1967-current 1/2- and 3/4-ton 4WD vehicles having the Dana44 front axle (found... more...  

Ford Front Hub Installer $32.80
Hammering on a front hub assembly when it's still on the vehicle can damage the hub, axle, or front wheel bearing. There must be a better way to install hubs! This is it. The 7924 installs... more...  

GM Terminal Tool Systems $11.60
Designed for Pack-Con and Weather-Pack terminals found on GM C3 Systems. Tool can also retrieve trouble codes from engine computer on late model GM vehicles.Manufacturer: LISLE  ... more...  

Bearing Packer $8.85
Fast, efficient and thorough. Simply place the bearing between the fitting on the end of the threaded shaft. Forces out old grease and evenly injects fresh grease. Cone diameter is 4-1/2... more...  

Quick-Off Lugnut Removal Tool $24.30
• Reversible socket for removal of late model OEM and aftermarket 3/4", 19mm, 13/16" and 21mm lugnuts that are damaged/rounded.• The LT 4200A has a fluted design which gives the socket a... more...  

Disc Brake Caliper Tool Kit $91.90
Includes:No. 7553 - Four wheel disc brake adapter tool Fits 1 1/2in. pistons. Usable two ways: one side fits GM Honda Mitsubishi Mazda Dodge Conquest and Subaru; other side fits Ford Pontiac... more...  

        

 
  Search our site:   

View Cart & CheckOut | Project List | Order Status |  Help    

 

[Home] [Customer Service] [Shopping Cart] [Project/Wish List]
  [Privacy Statement]  [Contact Us] [About Us] [Shipping]

Copyright © 2008, Pelican Parts Inc.