From: Dave Darling [darling@simlab.arc.nasa.gov] Sent: Wednesday, May 19, 1999 10:34 AM To: ian nelson Cc: 914 Subject: Re: [914] gas gauge/sender??? At 10:21 AM -0700 5/19/99, APorsch914@aol.com wrote: >hi, my gas gauge doesnt work, ive switched out the senders w/ that of 2 other >cars, so..ive tried 3 different senders, none of them worked so i switched >out the gauge w/ another gauge that i had, still nothing, it just sits there >a little bit in front of empty..any ideas?? Well, if you have eliminated the gauge, and eliminated the sender, then the only thing left would seem to be the wiring. Check the resistance from the gauge end of the sender wire to a good ground. I forget if it's a dead short or an open circuit that caruses an empty reading, but you'll probably find one of those two. --DD Dave Darling 74 914 2.0 (decapitated) darling@simlab.arc.nasa.gov "OFF WITH ITS HEADS!"