From: darling@simlab.arc.nasa.gov on behalf of Dave Darling [darling@simlab.arc.nasa.gov] Sent: Monday, May 10, 1999 9:24 AM To: Michael Neely Cc: 914 Subject: Re: [914] Center Console help 2 At 2:43 PM -0700 5/9/99, Michael Neely wrote: >Is there a standard name for the plugs the 914 has for the gauges in the >center console? I am at a loss, I bought the female plugs and they were too >small.. the 914's have a strange type... any name? are they available at >autozone? Or should I just call AA and chew them out and get them? AFAIK, the plugs are standard 6mm (or 7mm?) female spade connectors. Very close to 1/4" ones, and I *think* I've used those pretty successfully. I picked up some insulated connectors at a local electronics supply house. Oh, and I got a bunch of plugs from Palo Alto Speedo. They *should* fit the aftermarket gauges--I think. I'll have to check them. Anyway, those plugs have slots for three connectors and are keyed so that you can't plug them in incorrectly. Plus they come with the crimp-on connectors. E-mail me if you're interested. --DD Dave Darling 74 914 2.0 (decapitated) darling@simlab.arc.nasa.gov "OFF WITH ITS HEADS!"