From:	darling@simlab.arc.nasa.gov on behalf of Dave Darling [darling@simlab.arc.nasa.gov]
Sent:	Tuesday, May 04, 1999 7:57 AM
To:	Wrichards
Cc:	rmolina@fea.net
Subject:	Re: clutch adjustment

	BTW, you don't have to put my e-mail address in four
separate times...

>Id like to tighten up my clutchon my 71 914, Im having to press to
>the floor to engage. where can I do this, at the pedal end or the
>trany end?  easy to do?

	Tranny end.  It's easy to do, if you have a pair of 11mm
wrenches.  They're an odd-sized nut, and there are usually two of
them to keep the adjustment from moving.  Tighten the nut(s) to
move the engagement point up from the floor.

--DD

Dave Darling                                  74 914 2.0 (decapitated)
                      darling@simlab.arc.nasa.gov
                        "OFF WITH ITS HEADS!"


<img border="0" src="http://www2.pelicanparts.com/track.cgi" width="3" height="3">