From: bob@pelicanparts.com on behalf of Bob at Pelican Parts [bob@pelicanparts.com] Sent: Tuesday, June 15, 1999 8:58 PM To: ob@boone.net Cc: pelicanparts@csi.com Subject: Re: 84 911 wiring ? Wayne at Pelican Parts wrote: > > Hi there Mark, I don't think I got your other email. Let me forward you to Bob in > Tech Support, who can help you out with this problem. > > Thanks, > > Wayne > > "Mark T. O'Brien" wrote: > > > i sent a similar e mail on 6/12 through your web site. not sure if you > > received it. > > > > i look forward to doing business with you in the future. great web site. > > easy to follow. > > here's my situation. 1984 911 Carrerra - outside rear mirror switch. > > > > i was working on the door and the 6 wires were disconnected before i could > > mark them. > > > > if you flip the switch /bottom up the 6 connectors look like this; > > > > (5) (6) 4 form box/two @ ends > > _ _ > > > > (4) I I (1) > > _ _ to the right / front of car > > (3) (2) > > > > any idea as to where the wires go? 2 brown, black, blue, white , green > > > > i have a haynes and shop/german wire flow chart - can't make heads or tails. > > > > any help or who might know - much appreciated. O'B Hi Mark, Unfortunately, the newer current flow diagrams are a bit difficult to read, but they are the best available. As a start, brown is always ground. If you can find the correct 6-pin connector, the wire colors are shown on the diagram (not in color but abbreviated words, e.g. grn/wht means green wire with a white stripe. If all else fails, you can't really hurt anything by trying different ways of connecting the wires to see if it works. If you do it wrong, it will either not move or move in the wrong direction. Hope this helps, Bob at Pelican Parts