From: bob@pelicanparts.com on behalf of Bob at Pelican Parts [bob@pelicanparts.com] Sent: Monday, June 28, 1999 12:22 PM To: Wayne at Pelican Parts Cc: Ben and Donna Kramer Subject: Re: 924 information Hi Ben, The blue/yellow wire you are referencing is most likely to the temp sender on the engine, if it pegs the temp gauge when grounded. Porsche electrical systems are rather complex and interdependent. Modifications of some circuits can cause wierd things to happen. Hope this helps, Bob at Pelican Parts Wayne at Pelican Parts wrote: > Hi there. Let me forward you to Bob in Tech Support, and perhaps he > can help you out.As for the master cylinder, please give Tom in sales > a call at 1-888-280-7799, and he can help you out.Thanks,Wayne > > -----Original Message----- > From: bkramer@erinet.com [mailto:bkramer@erinet.com] > Sent: Saturday, June 26, 1999 4:07 AM > To: pelicanparts@csi.com > Subject: 924 information > > Wayne,HiI have two things I bypassed my heater core on a > 771/2 924. When I was done I found the temp gauge was not > working. I found a Blue/yellow wire that was unplugged and > can't find where to put it. its part of a three wire deal > that two of them plugs into a temp sensior unit infront of > the fire wall around the distributor area. when I touch the > blue/yellow wire to something the gauge goes all the way to > the red, so I know this wire has something to do with the > gauge.also can I get a price on a brake master cylinder for > a 771/2 924 2.0 with 4 lug wheels.thanksBen Kramer >