Does not fit 2004 GT3 Zircon piston inserts. Appears bigger than 28 mm damper removed. Old part supersedes (per Pelican) to this PN.
6 per caliper - not 6 per car as website states.
September 8, 2014
No-hassle, OEM part
What can I say? Factory parts, fit perfectly, no issues at all. You need 2 per caliper, 4 total.
They are not cheap but work great. If you need to pinch a few pennies you can re-use them. Just use a metal putty knife between the backs of the pads and the dampers, then use some some disc-brake quiet adhesive on the back of the new pads.
February 20, 2013
996 brake job
a little pricey but, you need them... Make sure you get two of these and two 30 mm for each rear caliper.
This site was designed and produced solely by Pelican Parts. Pelican Parts is not associated with Porsche Cars North America in any manner, except for a mutual appreciation and love of the cars. All pictures and references to the Porsche name, and the car names and shapes are for restoration reference only, and do not imply any association with Porsche. Pelican Parts is not responsible for any typographical errors contained within the site. Information and technical articles within this website are for reference only. Consult authorized factory manuals when performing repair procedures. By entering this site, you agree to hold Pelican Parts free from any liability arising out of the use of any information contained within.