Not Pelican's fault but this design is very expensive and very difficult to remove/replace. There is very little room to work in and no "wiggle room" as this hose is not designed to twist on, but rather slide into a keyed slot. Good luck doing this job first time. Maybe experience pays with an easier method.
This site was designed and produced solely by Pelican Parts. Pelican Parts is not associated with Porsche Cars North America in any manner, except for a mutual appreciation and love of the cars. All pictures and references to the Porsche name, and the car names and shapes are for restoration reference only, and do not imply any association with Porsche. Pelican Parts is not responsible for any typographical errors contained within the site. Information and technical articles within this website are for reference only. Consult authorized factory manuals when performing repair procedures. By entering this site, you agree to hold Pelican Parts free from any liability arising out of the use of any information contained within.