- This special order Genuine part is not cancellable or returnable, except for warranty replacement. If we are able to obtain permission to cancel or return the part, we reserve the right to charge a restocking fee of up to 25%
Tape the seal roughly in place with blue painters tape so you don't damage it as it is an odd shape and slips out of the upper windshield before you are done. Start with the passenger side lowest point and hook it into the track. Then work the drivers side. Finally don't forget to seal along the top by using needle nose vice grips gently with a cloth to squeeze the inner metal clips. You can see how the factory fused three pieces together, and mine has a tiny split at the joint. Going to take excess rubber from the other seals that were trimmed and rubber cement to prevent the tiny split from causing problems a few years from now.
This site was designed and produced solely by Pelican Parts. Pelican Parts is not associated with Porsche Cars North America in any manner, except for a mutual appreciation and love of the cars. All pictures and references to the Porsche name, and the car names and shapes are for restoration reference only, and do not imply any association with Porsche. Pelican Parts is not responsible for any typographical errors contained within the site. Information and technical articles within this website are for reference only. Consult authorized factory manuals when performing repair procedures. By entering this site, you agree to hold Pelican Parts free from any liability arising out of the use of any information contained within.