Sorry I need to print a retraction it appears it will fit with only the outer edges of the circles held in place by the stay nuts. Sorry about the prior post
Well I jumped the gun on the first review and discovered it will probably work fine even though the holes are different than the OEM. The new parts outer edges will line up with the nuts on the controls
April 12, 2015
It does not fit my 78SC targa
Guess the key word in the description is may fit. The holes are too far apart and will not work for my car. It also looks to be a different spacing than the OEM photo.
February 7, 2010
Plate fit to a tee - definite enhancement to the look of the console
This site was designed and produced solely by Pelican Parts. Pelican Parts is not associated with Porsche Cars North America in any manner, except for a mutual appreciation and love of the cars. All pictures and references to the Porsche name, and the car names and shapes are for restoration reference only, and do not imply any association with Porsche. Pelican Parts is not responsible for any typographical errors contained within the site. Information and technical articles within this website are for reference only. Consult authorized factory manuals when performing repair procedures. By entering this site, you agree to hold Pelican Parts free from any liability arising out of the use of any information contained within.