This one seems to be a little more of a study rubber than original, a little different as this one has the bump outs for the nuts off the side of the hand break built in, probably a better design, hand throttle side needed to be cut out, but had the space provided to do so, just used a nice sharp razor blade.
April 7, 2011
Rubber boot a bit off
The boot is oddly distorted in shape and I wonder if it will sit properly on the brake mechanism.
Also, one of the slots is not cut. I will have to cut it and hope that I do it neatly enough. I should not have to do this.
The quality of the rubber seems good and the boot appears to have been made from the same mould as the original.
This site was designed and produced solely by Pelican Parts. Pelican Parts is not associated with Porsche Cars North America in any manner, except for a mutual appreciation and love of the cars. All pictures and references to the Porsche name, and the car names and shapes are for restoration reference only, and do not imply any association with Porsche. Pelican Parts is not responsible for any typographical errors contained within the site. Information and technical articles within this website are for reference only. Consult authorized factory manuals when performing repair procedures. By entering this site, you agree to hold Pelican Parts free from any liability arising out of the use of any information contained within.