Make sure that you order a new Ball Joint Kit if you are removing the whole Strut, you will tear the rubber boot on the Ball Joint at the base of your Strut when separating the Struts from the Ball Joints with the Hammer and Ball Joint Separating Tool.
Don't forget the Porsche Ball Joint Pin Wrench Socket, 1/2 Drive Part Number PEL-TOL-P210 as you will need it as well.
This site was designed and produced solely by Pelican Parts. Pelican Parts is not associated with Porsche Cars North America in any manner, except for a mutual appreciation and love of the cars. All pictures and references to the Porsche name, and the car names and shapes are for restoration reference only, and do not imply any association with Porsche. Pelican Parts is not responsible for any typographical errors contained within the site. Information and technical articles within this website are for reference only. Consult authorized factory manuals when performing repair procedures. By entering this site, you agree to hold Pelican Parts free from any liability arising out of the use of any information contained within.