The picture associated with this item shows it in black, mounted the a bumper. How hard would it be to get a picture of the real item, or at least give an accurate description? The part is actually fiberglass with a badly-done body filler skim coat. I could deal with the effort of completing the shaping, priming and painting if it was disclosed, but when I went to fit it to the car, it was about 3" too short from side-to-side. It might have worked by putting an enormous amount of force on it to bend the fiberglass but I didn't want to take the chance because I knew I was going to return it the moment I got it out of the box. It cost me 2x shipping cost to return this.
Followup from the Pelican Staff: I'm sorry that you are not happy with the quality of this part. We will take it back of course with no questions asked. We've actually sold quite a few of these in the past year (about 20), and this is the first complaint / return we've had on this piece. We'll take a close look at it when it comes back - perhaps this one was defective.
This site was designed and produced solely by Pelican Parts. Pelican Parts is not associated with Porsche Cars North America in any manner, except for a mutual appreciation and love of the cars. All pictures and references to the Porsche name, and the car names and shapes are for restoration reference only, and do not imply any association with Porsche. Pelican Parts is not responsible for any typographical errors contained within the site. Information and technical articles within this website are for reference only. Consult authorized factory manuals when performing repair procedures. By entering this site, you agree to hold Pelican Parts free from any liability arising out of the use of any information contained within.