Order Online or Call:  
888-280-7799  
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
  Search our site:   

View Cart  | Project List | Order Status |  Help    

Home > Tools >  Volkswagen/Audi Specialty Tools

Wheel Hanger Tool $24.00
This tool screws into one of the wheel stud holes to make it easier to mount or remove the wheels on your car. It is manufactured from pure brass with a polished finish for easy sliding... more...  

Protecta Socket Set $19.00
These Chrome Molybdenum thin walled sockets have a plastic outer sleeve to prevent wheel damage during removal and installation of wheel fasteners. Each socket  also has a durable plastic... more...  

Torque Socket Set $51.95
Take the guess work out of tightening your wheels, these Schwaben torque sockets will stop tightening when the appropiate torque has been reached. This handy color coded set includes 17mm... more...  

Air Cooled VW Power Bleeder Kit $59.95
The Air Cooled VW Power Bleeder Kit works on most Air Cooled VWs, including Bugs, Buses, and Square Backs and Fast Backs (Includes adapters 1104). Comes with everything you need to bleed... more...  

European Power Bleeder Kit $51.95
The European Power Bleeder Kit works on most European cars, including Alfa Romeo, Audi, BMW, Fiat, Mercedes, Peugeot, Porsche, Renault, SAAB, Volkswagen, Volvo, and all other cars with 45mm... more...  

Black Label European Power Bleeder Kit $69.95
The Black Label European Power Bleeder Kit features a custom-machined aluminum cap and deluxe swivel fitting. Comes with an extra length of high grade poly urethane tubing that won't cloud... more...  

Oil Filter Housing Socket $11.95
Specifically designed for the late model VAG oil filter housings (36mm, 6 point, 3/8" drive) ... more...  

Drain Plug Removal Tool $34.95
If your VW's drain plug is the tamper-proof type, you'll need the Triple-Square tool to remove the drain plug. ... more...  

Radio Removal Tools $12.60
(Pair) Needed for the proper removal of radio. ... more...  

Fuel Line Pliers $16.95
Manufactured from Aluminium alloy and designed specifically for the removal of the newest design of fuel line clips and can also hold fuel lines without causing damage. These new fuel line... more...  

Wheel Bearing Kit $140.00
Change a wheel bearing without changing your wheel alignment the easy way. This complete kit includes bearing caps and barrels for Toyota/Lexus, Nissan/Infinity, Honda/Acura, Other Asian... more...  

Axle Impact Socket Set $45.00
This axle impact set has all the hard to find tools for removing and installing axles in one set. Made of quality hardened steel and safe for use with air impact tools. ... more...  

Camber Adjuster $18.00
Camber Adjuster, Applicable - Dasher, Fox ... more...  

Strut Clamp Spreader - Oval Pin - Bit 5.0mm $21.20
This special -Oval Pin- drive bit with a 1/2in drive was developed for the crucial task of -prying open- the strut clamps of hub castings in order to free the bottom of the strut unit. Applicable... more...  

Strut Clamp Spreader - Oval Pin - Bit 6.0mm $21.20
This special -Oval Pin- drive bit with a 1/2in drive was developed for the crucial task of -prying open- the strut clamps of hub castings in order to free the bottom of the strut unit. Applicable... more...  

Timing Belt Tensioner Tool $19.00
This tool allow you to properly adjust the tensioner on all Volkswagen/Audi engines that have the "2-pin" eccentric adjustment. 60* Offset and 7" in Length. ... more...  

Cylinder Head Alignment Kit $21.00
Set comes with (2) pairs of guide pins, 11X1.75mm and 12X1.75mm. ... more...  

Press Driver Kit $54.60
This set is used for the proper installation of the oil seal into steering rack. ... more...  

Engine Mount Arbor $19.80
To be used in conjunction with a hammer. ... more...  

Engine Mount Arbor
To be used in conjunction with a hammer. ... more...  

Puller used for the proper extraction of injection pump drive gear. $79.80
Puller used for the proper extraction of injection pump drive gear. ... more...  

Exhaust Manifold Spring Clip Spreader $75.60
Tool used for the proper R and R of exhaust manifold spring clips. ... more...  

Tappet Depressor $38.60
Tappet Depressor needed for preloading cam followers when exchanging valve adjusting shims. ... more...  

Valve Spring Compressor Bar $63.00
Valve spring Compressor Bar used for R and R of valve spring or rocker arm. Job can be done with the cylinder head on or off the car. Comes complete with an aluminum depressor foot. Used... more...  

27mm Male Hex Socket with 3/8 in. drive $14.40
27mm Male Hex Socket with 3/8 in. drive, needed for R and R of 27mm female hex timing plug of engine bell housing and R and R of 27mm female hex transmission access cover. ... more...  

Pin Wrench Socket $18.00
This tool is used for R and R of grooved ring retaining nut on strut tower of front shock absorber. ... more...  

Locking Pin for diesel injection pump sprocket $10.70
Locking Pin crucial for securing Bosch diesel injection pump sprocket from rotating during R and R of cam shaft drive belt. This Locking Pin also assists in locating the general timing position... more...  

Counter Holder/Fan Removal Tool needed for R and R of front crank shaft pulley. $75.60
Counter Holder/Fan Removal Tool needed for R and R of front crank shaft pulley. ... more...  

Extension Wrench $92.40
Extension Wrench needed for R and R of front crankshaft bolt. ... more...  

Valve Stem Installer $13.50
Tool Needed for proper installation of Valve Stem ... more...  

Support Bridge $71.40
For R and R of valve spring or rocker arm. Used in conjunction with tool VA6010 ... more...  

Counter Holder/Fan Removal Tool $28.50
Counter Holder/Fan Removal Tool needed for securing the power steering or water pump pulley from rotating during R and R of the three bolts that attach the pulley to the crank shaft. ... more...  

Crankshaft Lock Bolt $32.70
Threaded pin - Lock Bolt (above) Used to secure crankshaft at T.D.C. during R and R of toothed timing belt, flywheel, drive plate, and crank bolt. ... more...  

Securing Bar $50.40
Locking Wrench needed for R and R of drive belt sprocket on cam shaft and drive belt sprocket of intermediate shaft. ... more...  

Locking Hook $78.90
Tool Set for factory correct and trouble free installations. Set for Diesel timing of Bosch injection pumps. This set has been developed for aligning the cam shaft with the Diesel pump on... more...  

Diesel Cam Shaft Locking Plate - VW/Audi and Volvo diesel $16.20
Used for securing the cam shaft from rotating and maintaining correct timing position during R and R of cam shaft drive belt. ... more...  

Dial Gauge Holder $33.60
Used for accurate adjustment of Bosch diesel injection pump. This Dial Gauge Holder screws into the back of the injection pump and comes equipped with a 10cm dial indicator extension pin... more...  

Cam Locking Tool $170.00
This tool is needed for securing both engine banks camshafts at T.D.C. when replacing the timing belt. This kit also includes the necessary crank shaft locking pin. Cam securing bar fits... more...  

Cam Securing Bar $117.40
Needed for the crucial task of securing both engine banks, cam shafts at T.D.C. when replacing the timing belt. Used in conjunction with tool VA 6025, T.D.C. Lock Bolt. ... more...  

Cam Securing Bar $113.20
Needed for the crucial task of securing both engine banks, cam shafts at T.D.C. when replacing the timing belt. Used in conjunction with tool No. VA 6025, T.D.C. Lock Bolt. ... more...  

Cam Securing Bar - Applicable - VW / Audi V8 $108.80
Needed for the crucial task of securing both engine bank's cam shafts at T.D.C. when replacing the timing belt. Used in conjunction with tool #VA6025, T.D.C. Lock Bolt. Applicable: VW /... more...  

Off-Set Pin Wrench Spanner Bar $35.20
This special Off-Set Pin Wrench Spanner bar was specially designed to adjust for timing or R&R of timing belt on VW engines from 1998+. Made in Europe. ... more...  

Camshaft Ruler $21.20
This special service tool is critical for the task of correct cam shaft alignment during assembly or adjusting of cams. Applicable: VW models equipped with a VR-6 engine. ... more...  

Crankshaft Locking Pin $22.60
Needed to secure the crank shaft at T.D.C. during R&R of toothed timing belt, flywheel / drive plate and crank bolt. Applicable: Audi V-6, 3.0L with 5 valves per cylinder ... more...  

Special Torx Driver with universal Joint - T45 $21.00
This special torx bit is equipped with a universal joint and a 3/8in drive, needed when straight shaft bits are not able to access the bolt. This T45 is a multi-tasked driver. 1) Designed... more...  

Pinion Nut Cone Socket $79.80
Pinion Nut Cone Socket, 1/2 in drive, Applicable - Early VW air-cooled models ... more...  

Expansion Cap Adapter - VW / Audi 75-93 $8.60
Needed for checking blow - off pressure or leakage of expansion tank cap.VW / Audi 75 - 93 Models with MALE threads on filler neck of expansion. Used in conjunction with item VZ22 ... more...  

Expansion Tank Adapter - VW/Audi models 89- $31.00
Needed for pressurizing the liquid cooling system. Tank Adaptor needed for pressurizing the liquid cooling system. ... more...  

Expansion Cap Adapter - VW/Audi models 89- $30.20
Needed for checking blow - off pressure or leakage of expansion tank cap.Cap Adaptor needed for checking the pressure relief valve of radiator cap. ... more...  

Radiator Tank Adapter for 39mm wide / 17mm deep radiator neck $45.30
Radiator Tank Adapter, All models with a 39mm wide and 17mm deep radiator neck ... more...  

Expansion Tank Adapter - VW $11.50
Needed for checking blow - off pressure or leakage of expansion tank cap.Cap Adaptor needed for checking the pressure relief valve of radiator cap. ... more...  

Expansion Tank Adapter - VW $42.00
Needed for pressurizing the liquid cooling system.Tank Adaptor needed for pressurizing the liquid cooling system. ... more...  

Expansion Tank Adapter - VW/Audi models 96- $45.30
Needed for pressurizing the liquid cooling system on models with male threads on filer neck of expansion tank. ... more...  

75-93 Audi/VW Female Threaded Cooling System Test Adapter
• Applicable: 1975-1993 Audi and VW with male threads on the expansion tank. • Designed to work with Stant Cooling System Pressure Tester and other compatible testers. Manufacturer: ASSENMACHER... more...  

90-98 VW Cooling System Pressure Test Adapter
• Designed to work with Stant Cooling System Pressure Tester • Applicable: VW models with female threads in expansion tank, 1990-1998 Manufacturer: ASSENMACHER SPECIALTY TOOLS   ... more...  

Audi/VW Cooling System Pressure Test Adapter
• 1996-1998 Audi A4; 1993-1999 Audi A6, VW Passat, and new Beetle; 1999 VW Golf and Jetta Manufacturer: ASSENMACHER SPECIALTY TOOLS    Click here to visit the manufacturer... more...  

        

 
  Search our site:   

View Cart & CheckOut | Project List | Order Status |  Help    

 

[Home] [Customer Service] [Shopping Cart] [Project/Wish List]
  [Privacy Statement]  [Contact Us] [About Us] [Shipping]

Copyright © 2011, Pelican Parts Inc. -    DMCA Registered Agent Contact Page