| Porsche Tools - Page 8 |
Magnetic Box "V" Wrench (17mm) |
| This unique-looking tool is used to aid in the removal of the engine/transmission bolts. The V-Wrench holds the nut on the other side of the engine compartment so that you can remove the nut from the transmission. The V design holds the nut steady, unlike a normal wrench, and allows you to remove the bolt on the other side without the help of an assistant. |
|
PEL-TOL-P222 | Magnetic Box "V" Wrench (17mm) [Photo] | $33.00 |  |
Suspension Alignment Tools |
| Doing some adjustments to your suspension? Using the right tools can help you obtain exactly the values that you are looking for. |
|
PEL-TOL-P221 | Rear Suspension Toe-In Adjuster, 911 All [Photo] | $28.00 | |
PEL-TOL-P235 | Camber Adjuster, 911, C2 and C4 [Photo] | $21.00 | |
Ride Height Wrench |
| don't be without this Ride Height Combination Wrench went setting up your suspension! Fits the spring plate eccentric 24mm and 36mm bolts. Powder coated for a long lasting finish. |
|
PWE-2436RHW | Ride Height Combination Wrench, 911 1977-89 [Photo] | $30.70 | |
Extraction Tools |
| Nothing beats the frustration of trying to remove something that isn't going anywhere. Do the job right by using the right tools to remove that gear or bushing. These pullers are designed to properly remove what they were designed to remove, without damaging anything else. |
|
PEL-TOL-P229 | Distributor Drive Gear Puller, 912, 914, 356 [Photo] | $24.20 | |
PEL-TOL-P236 | Oil Piston Pressure Relief Valve Puller, 912, 914, 356 [Photo] | $29.00 | |
PEL-TOL-P239 | Starter Bushing Puller, 12V [Photo] | $33.00 | |
PEL-TOL-P238 | Starter Bushing Puller, 6V [Photo] | $33.00 | |
PEL-4491B | Oxygen Sensor Removal Tool, 22mm, 3/8" drive [Photo] | $23.00 | |
Spanner Wrench Set |
| This four piece spanner wrench set includes the sizes 27mm, 30mm, 32mm, 36mm, and is most useful for various repairs on your car. |
|
PEL-TOL-P242 | Spanner 4 Wrench Set, 911, 930, 914-6, 944, 968, 27mm, 30mm, 32mm, 36mm [Photo] | $63.00 | |
32 MM Oil Line Wrench |
| This oil line wrench is specifically designed for the 944 equipped with 32mm oil line fittings. Manufactured from Chrome-Vanadium Steel for corrosion resistance and years of reliable service. |
|
| PEL-PP902843 | 944 32 MM Oil Line Wrench | $26.95 | |
36 MM Oil Line Wrench |
| Having trouble removing the large oil lines on your Porsche? Then this is the wrench for you. Precision laser cut 36MM wrench with sculpted handle for maximum grip on the fitting and in your hand. 12 point design will not slip off or round fittings like open-end wrenches do. 15 degree head design allows wrench to operate in the tight confines of the engine compartment. If you own a Porsche 911, 930, 914-6, you'll need this wrench. |
|
PEL-PW-OLW | 36 MM Oil Line Wrench [Photo] | $28.65 | |
