| Porsche Tools - Page 10 |
Ride Height Wrench |
| Don't be without this Ride Height Combination Wrench went setting up your suspension! Fits the spring plate eccentric 24mm and 36mm bolts. Powder coated for a long lasting finish. |
|
PWE-2436RHW | Ride Height Combination Wrench, 911 1977-89 [More Info] | $30.70 |  |
Trailing Arm Height Adjuster |
| This special service tool was developed in order to aid the technician with SAFE and easy ride height adjustment of rear torsion arms and/or general adjusting of Aftermarket Adjustable Spring Plates. The inherent design of this tool acts as an extension of the trailing arm by latching onto it at two hook points. The end of the protruding tool is supported by a roll-around floor jack. You simply pre-load the suspension and are able to maintain the travel in any desired position w/o having to use chains, which may slip and is very dangerous. |
|
TOL-P244 | Trailing Arm Height Adjuster, Porsche 911/911 Turbo (1965-89) [More Info] | $91.00 | |
Elephant Racing Spring Plate Bushing Removal Tool |
| Elephant Racing developed this tool to simplify the removal of spring plate bushings. The bushings are bonded to the spring plate, and removal is not easy. This convenient cutting tool shaves the bushings off, removing nearly all the rubber and require just a bit of cleanup to finish. This tool greatly simplifies the bushing removal process. |
|
ERMP-2061002 | Elephant Racing Spring Plate Bushing Removal Tool, 911/911 Turbo (1965-86), 944/968 [More Info] | $85.00 | |
Extraction Tools |
| Nothing beats the frustration of trying to remove something that isn't going anywhere. Do the job right by using the right tools to remove that gear or bushing. These pullers are designed to properly remove what they were designed to remove, without damaging anything else. |
|
PEL-TOL-P229 | Distributor Drive Gear Puller, 912, 914, 356 [More Info] | $25.20 | |
PEL-TOL-P236 | Oil Piston Pressure Relief Valve Puller, 912, 914, 356 [More Info] | $27.70 | |
PEL-TOL-P239 | Starter Bushing Puller, 12V [More Info] | $31.00 | |
PEL-TOL-P238 | Starter Bushing Puller, 6V [More Info] | $31.00 | |
PEL-4491B | Oxygen Sensor Removal Tool, 22mm, 3/8" drive [More Info] | $25.95 | |
Spanner Wrench Set |
| This four piece spanner wrench set includes the sizes 27mm, 30mm, 32mm, 36mm, and is most useful for various repairs on your car. |
|
PEL-TOL-P242 | Spanner 4 Wrench Set, 911, 930, 914-6, 944, 968 (27mm, 30mm, 32mm, 36mm) [More Info] | $60.50 | |
32 MM Oil Line Wrench |
| This oil line wrench is specifically designed for the 944 equipped with 32mm oil line fittings. Manufactured from Chrome-Vanadium Steel for corrosion resistance and years of reliable service. |
|
PEL-PP902843 | 944 32 MM Oil Line Wrench [More Info] | $26.95 | |
36 MM Oil Line Wrench |
| Having trouble removing the large oil lines on your Porsche? Then this is the wrench for you. Precision laser cut 36MM wrench with sculpted handle for maximum grip on the fitting and in your hand. 12 point design will not slip off or round fittings like open-end wrenches do. 15 degree head design allows wrench to operate in the tight confines of the engine compartment. If you own a Porsche 911, 930, 914-6, you'll need this wrench. |
|
PEL-PW-OLW | 36 MM Oil Line Wrench [More Info] | $31.95 | |
