| BMW Parts - Tools - Page 5 |
Engine Tools |
| Cam Sprocket Turning Spanner |
| For turning sprockets when removing & installing VANOS Unit on Single VANOS Engines - M50, M52, S50, S52 - Service manual reference# 11 5 490 |
|
TOL-3044 | Cam Sprocket Turning Spanner Rotation Tool, Service manual reference# 11 5 490, Applicable: BMW engines - M50, M52, S50US, S52US *Note: This tool only needed for Later Vanos Engines with the Diaphram Spring located between the Intake Cam stop disks. Not required for Models thru 2/95 [More Info] | $25.20 |  |
| Crank Pulley Securing Tools |
| These tools bolt to the front of the crankshaft pulley and allow you to secure the engine from turning, allowing you to remove the crank pulley securing nut. |
|
TOL-3034-1 | Crank Pulley Securing Tool, For M60 and M62 Engines, Each. See BMW service # 11 2 450 [More Info] | $69.70 | |
TOL-3034-2 | Crank Pulley Securing Tool, For M20, M42 and M50 Engines, Each [More Info] | $58.80 | |
TOL-3034-3 | Crank Pulley Securing Tool, For BMW M30 Engines, Each [More Info] | $58.80 | |
TOL-3034 | Crank Pulley Securing Tool Set, Contains All Above Wrenches [More Info] | $159.60 | |
| Harmonic Balancer Service Master Kit, for BMW M52TU, M54, M56 |
| This special service master kit was developed to make the difficult task of breaking loose the harmonic balancer / crank shaft bolt easy by using tool BMW3050-1 in conjunction with BMW3050-2. Once the crank bolt is removed, the second phase of this kit is used for the critical task of extracting the sometimes stuck vibration damper by using tool BMW3050-2 in conjunction with BMW3050-3. Purchase the tools individually, or all together in the master kit. For BMW M52TU, M54, and M56 engines. |
|
TOL-BMW3050 | Harmonic Balancer Service Master Kit (all three tools), for BMW M52TU, M54, M56 [More Info] | $247.00 | |
TOL-BMW3050-1 | Counter Hold Bar, for BMW M52TU, M54, M56 [More Info] | $82.00 | |
TOL-BMW3050-2 | Counter Holder Head, for BMW M52TU, M54, M56 [More Info] | $110.00 | |
TOL-BMW3050-3 | Pulley Press Remover Fixturet, for BMW M52TU, M54, M56 [More Info] | $92.00 | |
| Steering Rack Pin Wrenches |
| This wrench is used to remove and install the slotted nut on the steering rack on BMW E30 3 Series models. This tool is required if you are replacing your steering rack seals. |
|
TOL-3031 | Steering Rack Pin Wrench, For All E30 3 Series Models (1984-92), Each [More Info] | $42.00 | |
| Universal Oil Seal Extractors |
| This oil seal extractor allows you to safely remove oil seals from components such as crankshafts, camshafts and just about anywhere else there is an oil seal that needs replacing. It's universal style design allows it to be used on not only BMW's but other cars as well. |
|
TOL-3019 | Universal Oil Seal Extractor, All BMW Engines, Each [More Info] | No Longer Available | |
| Oil Seal Arbors |
| This tool is used to properly install the oil seal on the pulley side of the crankshaft on BMW engines. Be sure to order the correct tool for your application |
|
TOL-3018 | Oil Seal Arbor, For BMW M20 Engines, Each [More Info] | No Longer Available | |
TOL-3001 | Oil Seal Arbor Kit, For M10 and M30 Engines, Each [More Info] | No Longer Available | |
