| BMW E36 Tools - Page 10 |
Fuel Line Pliers |
Manufactured from Aluminium alloy and designed specifically for the removal of the newest design of fuel line clips and can also hold fuel lines without causing damage. These new fuel line clips can be found on Alfa Romeo, Audi, BMW, Porsche, Volkswagen, and Volvo.
NOTE: Please refer to the images to determine if these pliers are compatible with your vehicle's fuel system. |
|
SCHW-P-648 | Fuel Line Pliers (adjustable), fits newer BMW, Audi/VW, Porsche [More Info] | $16.95 |  |
Brake Caliper Piston Tool |
| This kit allows you to rotate various pistons back into their caliper housing when changing brake pads. This kit works with Ford, GM, Volkswagen, Honda, Mazda, Mitsubishi, Subaru, Toyota, BMW, Audi and other vehicles. |
|
SCHW-PBK-11PCS | Brake Caliper Piston Tool (11 piece) [More Info] | $39.95 | |
Air/Fuel Ratio Meter |
| WEGO IV Wide-Band Air/Fuel Ratio Tuning Aid |
The WEGO IV is a highly accurate and complete air/fuel ratio metering system with built-in data logging. The unit displays air/fuel ratio (AFR) and continuously logs over 2 hours of data, including AFR, engine RPM, and a spare 0-5V analog input for sensors such as throttle position or manifold pressure.- Includes Bosch LSU 4.2 oxygen sensor, 96" sensor extension cable, 18 x 1.5 mm weld nut for exhaust pipe, USB cable, and software for downloading and charting
- Data is easily exported to a spreadsheet
- Attractive black anodized aluminum housing with convenient front panel mini USB port, compact size: 3.3"L x 2.1"W x 0.9"H
- RPM input signal connects directly to Porsche tachometer - no adapter required
- Easy free-air calibration for sensor aging effects
- Ultra-bright daylight readable blue LED display and automatic dimming under low light conditions
- 0-5V analog AFR output for interface to dyno instrumentation
- Industrial grade clamping terminal block on rear panel allows easy hookup
Available in either single or dual channel. Dual channel unit displays and logs two channels of AFR data. The 12 foot extension cable is sold separately and is necessary for installation in a rear engine car (two are required for the dual-channel unit). |
|
IG3-114001 | WEGO IV Wide-band AFR Gauge and Data Logger [More Info] | $426.00 | |
IG3-113001 | WEGO IV Dual Channel Wide-band AFR Gauge and Data Logger [More Info] | $687.50 | |
| IG3-115004 | WEGO 12 Foot Extension Cable [More Info] | $29.50 | |
| Innovate Motorsports LM-2 |
The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meters digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition. - Patented Direct Digital Wideband Technology
- Wideband O2 Compatible with ALL fuel types
- Single or Dual Channel Version Available
- OBD-II Scan tool- read/clear DTCs and log up to 16 channels of CAN OBD-II Data
- Log directly to SD card (included)
- Playback log data on screen and/or with powerful LogWorks software (included)
- Large high-contrast graphics LCD
- Built-in RPM converter (direct frequency or with optional inductive clamp)
- 4 fully-differential analog inputs
- 2 configurable linear analog outputs
- Positive lock connectors for all connections
- Innovate MTS serial IN and OUT
- USB connection to your PC
The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user.
The LM-2 Kit (Single Wideband O2) includes the LM-2 meter, Bosch wide-band oxygen sensor, 10 ft sensor cable, cigarette-lighter power adapter, analog in/out cable, ODB-II/CAN interface cable, SD memory card, USB cable for PC connection, weld-in bung and plug, LogWorks software CD, and quick-start guide. Carrying Case also included!
More accessories for your LM-1 available here.
For permanently installed tuning solutions, click here.
Manufacturer: Innovate Motorsports
Click here to visit the manufacturer's home page. |
|
INN-3806 | Innovate Motorsports LM-2: Digital Air/Fuel Ratio Meter [More Info] | $479.00 | |
Jack Stands |
| Never work on your car when it is elevated only by the jack -- very dangerous! Get a set of these jack stands and safely work on your car. Heavy duty 6000 pound capacity. Adjustable from 13.2" to 21.5". |
|
TOL-10498-1 | Flat Top Jack Stand (sold individually) with rubber pad, 6000 pound capacity [More Info] | $69.95 | |
TOL-10497-1 | Jack Stand (sold individually) with standard-style (chassis) top, 6000 pound capacity [More Info] | $64.95 | |
AC Hydraulic Jacks |
Super high-lift, simple and safe to operate. Just depress the lever with your foot and the jack pad raises up to contact the jacking point on your vehicle. DK13HLQ is constructed with a flat inner steel frame so the front 16 inches of the jack has a height of less than 3.5 inches and a maximum lifting height of 29 inches! Just the perfect height for stock or lowered vehicles! Ergonomically designed handle ensuring a firm and comfortable grip whatever the conditions. Dead-mans control on raising and lowering the jack arm.
Click here to download the User Manual |
|
TOL-13HLQ | DK13HLQ 2800lb High-Lift Floor Jack with QuickLift Pedal [More Info] | $549.00 | |
The DK20Q offers all the benefits of the DK20 plus the convenience of the quicklift pedal. Simple and safe to operate. Just depress the lever with your foot and the jack pad raises up to contact the jacking point on your vehicle.
Click here to download the User Manual |
|
TOL-DK20Q | DK20Q 4400lb Floor Jack with QuickLift Pedal [More Info] | $539.00 | |
Ultra-low minimum height of only 3.15 inches, just the perfect height for stock or lowered vehicles! Maximum jack height of 19.7 inches! Ergonomically designed handle ensuring a firm and comfortable grip whatever the conditions. Dead-mans control on raising and lowering the jack arm. Built-in safety valve to ensure against overloading and a wide, rugged steel frame for stability and long service life.
Click here to download the User Manual |
|
TOL-DK20 | DK20 4400lb Floor Jack [More Info] | $399.00 | |
| Don't forget the GS1 Jack Saddle Cushion to protect your vehicle's underbody from damage. |
|
TOL-3601400 | Jack Saddle Cushion (GS1) for AC Hydraulic Jack, each [More Info] | $23.95 | |
