| BMW E46 Axles & Bearings - Page 5 |
Turner Motorsport Extended Length Lug Bolts |
| Silver Extended Length Lug Bolts |
PEL-TWH995128S | 28mm Length Lug Bolt, For use with 3mm wheel spacers, Silver, 12 X 1.5mm, Sold Individually, Each
Brand: TMS [More Info] | $2.50 |  |
PEL-TWH995132S | 32mm Length Lug Bolt, For use with 5-8mm wheel spacers, Silver, 12 X 1.5mm, Sold Individually, Each
Brand: TMS [More Info] | $2.50 | |
PEL-TWH995135S | 35mm Length Lug Bolt, For use with 10mm spacers, Silver, 12 X 1.5mm, Sold Individually, Each
Brand: TMS [More Info] | $2.50 | |
PEL-TWH995139S | 39mm Length Lug Bolt, For use with 12mm spacers, Silver, 12 X 1.5mm, Sold Individually, Each
Brand: TMS [More Info] | $2.50 | |
PEL-TWH995142S | 42mm Length Lug Bolt, For use with 15mm spacers, Silver, 12 X 1.5mm, Sold Individually, Each
Brand: TMS [More Info] | $2.50 | |
PEL-TWH995145S | 45mm Length Lug Bolt, For use with 20mm spacers, Silver, 12 X 1.5mm, Sold Individually, Each
Brand: TMS [More Info] | $2.50 | |
Turner Motorsport Wheel Spacers  |
| Pelican is now pleased to offer a solution for those of you running big brake kits on your BMW. Many wheels are not a direct fit with big brake kits or coilover suspensions. A wheel spacer helps by moving the wheel away from the caliper, wheel spokes, or suspension that is causing the clearance issue. If your wheels have the wrong offset (too high an offset, causing the wheels to be too far inward) a set of wheel spacers can correct this by pushing the wheel out to the correct offset. Spacers need to be removed from time to time, and it's not uncommon for them to become stuck to the hub of the car. Most companies tell you to use a hammer and chisel to beat the spacer off. All this does is distort the spacer which, in turn, may lead to a vibration. This latest spacer design incorporates pockets around the entire circumference of the spacer. These pockets allow you to easily pop the spacer off with a flat blade screwdriver without damaging it. TMS starts with very strong and lightweight high-grade aluminum with a strong resistance to corrosion. They go the extra step and have our spacers coated with a military-spec hard-coat for extreme corrosion prevention and with a dark gray color to blend in with your wheel and brake package for best appearance. All Turner Spacers are CNC machined to very tight machining tolerances to save weight while not affecting strength. Our spacers are engineered and manufactured to preserve ride quality, last a long time, and enhance your BMW's handling and looks. Each spacer is laser engraved with it's size for fast identification. |
|
PEL-TWH9905005 | Turner Motorsport 5mm Hub-Centric Wheel Spacer Set, Set Includes 2 Spacers
Brand: TMS [More Info] | $79.95 | |
PEL-TWH9905010 | Turner Motorsport 10mm Hub-Centric Wheel Spacer Set, Set Includes 2 Spacers
Brand: TMS [More Info] | $89.95 | |
PEL-TWH9905015 | Turner Motorsport 15mm Hub-Centric Wheel Spacer Set, Set Includes 2 Spacers
Brand: TMS [More Info] | $89.95 | |
Wheel Center Caps |
36-13-6-783-536-M9 | Wheel Center Cap for Standard Wheel
Brand: Genuine BMW [More Info] |  |
| $10.25 | |
36-13-1-181-080-M9 | Emblem for Wheel Center Cap (65 mm Diameter), E46 323i, 328i, Each
Brand: Genuine BMW [More Info] | |
| $7.00 | |
Wheel Hanger Tool |
| This tool screws into one of the wheel stud holes to make it easier to mount or remove the wheels on your car. It is manufactured from pure brass with a polished finish for easy sliding of the wheel without any damage. Not only does this make wheel installation quicker and easier, but it also helps avoid knocking of the wheels into your painted calipers, which can normally lead to unsightly scuffing. |
|
RB-BWH-12MM | Wheel Hanger Tool, Brass, fits models that use 12 x 1.5mm lug bolts, each [More Info] | $24.95 | |
CV Joint Removal Tool |
Avoid stripping your bolt heads and spending wasted hours cutting and grinding them off by using this special tool to easily remove those pesky CV joint bolts. This tool is for use with 12-point star-shaped bolts only. Please make sure to check your bolts before ordering. It's common for previous owners to replace the 12-point star shaped bolts with more standard allen head bolts instead. Although the 12-point pattern allows you to get a better grip on the bolts (with the correct tool), and apply the high torque that the bolts require, previous owners may have stripped out these bolt heads by attempting to use a torx or hex driver instead of the proper tool. A word of caution here - these other tools MAY work, but if they strip the bolt head, then you are in for an entire afternoon of grinding it off the next time it's replaced.
TIP: Spray the bolts down with WD-40 or Liquid Wrench first to loosen the dirt and debris in the bolt head, then scrape out any dirt that may be left. With the socket on a 6" extension, slip the tool into the bolt head and give it a gentle rap on the end with a mallet to seat it firmly. Following this simple procedure will hopefully avoid you from stripping any CV bolts. |
|
TOL-SK45438 | CV Joint Bolt Removal Tool - 8mm, 12-point Socket Driver, 3/8 in. drive [More Info] | $16.75 | |
CV Joint Grease |
| Remember to lube and pack your CV joints when you replace them. Pelican carries both the LubroMoly and the Swepco 101 grease for complete lubrication of your joints. Both are very good and very slippery. |
|
SWE-101 | Swepco CV Joint Grease, 14.4 oz [More Info] | $10.30 | |
| 2003-M19 | CV Joint Grease, 100g tube
Brand: Liqui Moly [More Info] | |
| $5.50 | |
