| BMW E39 Specialty Tools - Page 9 |
Transmission Tools |
| 30mm Flange Nut Socket |
| This special 30mm deep walled socket is used to remove both the drive shaft flange nuts and the pinion drive shaft nuts on the differential. |
|
PEL-TOL-3025 | 30mm Flange Nut Socket, BMW E39 5 Series, All (1996-03), Each [More Info] | $44.50 |  |
| Drain Plug Socket Set |
TOL-BMW3061 | Drain Plug Socket Set of 3, Single Piece Construction, Universal for most BMW applications (Includes 10mm, 14mm, 17mm), Set Note: Please verify size before ordering. [More Info] | $33.95 | |
| Transmission Drain Plug Socket |
| This special 17mm ID socket is used to remove the transmission fill and drain plugs. this tool is essential when doing any transmission service. Please be sure to check first if your transmission uses this type and size of plug before ordering. |
|
PEL-DPR-1017 | Transmission drain Plug Socket, BMW Models with 17mm allen plugs ONLY, Each [More Info] | $28.50 | |
Jack Stands |
| Never work on your car when it is elevated only by the jack -- very dangerous! Get a set of these jack stands and safely work on your car. Heavy duty 6000 pound capacity. Adjustable from 13.2" to 21.5". |
|
TOL-10498-1 | Flat Top Jack Stand (sold individually) with rubber pad, 6000 pound capacity [More Info] | $69.95 | |
TOL-10497-1 | Jack Stand (sold individually) with standard-style (chassis) top, 6000 pound capacity [More Info] | $64.95 | |
AC Hydraulic Jacks |
Super high-lift, simple and safe to operate. Just depress the lever with your foot and the jack pad raises up to contact the jacking point on your vehicle. DK13HLQ is constructed with a flat inner steel frame so the front 16 inches of the jack has a height of less than 3.5 inches and a maximum lifting height of 29 inches! Just the perfect height for stock or lowered vehicles! Ergonomically designed handle ensuring a firm and comfortable grip whatever the conditions. Dead-mans control on raising and lowering the jack arm.
Click here to download the User Manual |
|
TOL-13HLQ | DK13HLQ 2800lb High-Lift Floor Jack with QuickLift Pedal [More Info] | $549.00 | |
The DK20Q offers all the benefits of the DK20 plus the convenience of the quicklift pedal. Simple and safe to operate. Just depress the lever with your foot and the jack pad raises up to contact the jacking point on your vehicle.
Click here to download the User Manual |
|
TOL-DK20Q | DK20Q 4400lb Floor Jack with QuickLift Pedal [More Info] | $539.00 | |
Ultra-low minimum height of only 3.15 inches, just the perfect height for stock or lowered vehicles! Maximum jack height of 19.7 inches! Ergonomically designed handle ensuring a firm and comfortable grip whatever the conditions. Dead-mans control on raising and lowering the jack arm. Built-in safety valve to ensure against overloading and a wide, rugged steel frame for stability and long service life.
Click here to download the User Manual |
|
TOL-DK20 | DK20 4400lb Floor Jack [More Info] | $399.00 | |
| Don't forget the GS1 Jack Saddle Cushion to protect your vehicle's underbody from damage. |
|
TOL-3601400 | Jack Saddle Cushion (GS1) for AC Hydraulic Jack, each [More Info] | $23.95 | |
Stud Removal Tools |
| This tool incorporates a collet that latches onto and compresses the threads of the stud, squeezing them tight. Then the tool and the stud can be removed. If you are removing studs from an engine case, an extra vise-grip or two might be useful as well to get more torque on the studs. |
|
PEL-SNAPON-CG500-2 | Stud Remover Collet Tool [More Info] | $93.75 | |
PEL-SNAPON-CG500-43 | Stud Remover Collet, M10x1.5 [More Info] | $55.00 | |
PEL-SNAPON-CG500-37 | Stud Remover Collet, M8x1.25 [More Info] | $55.00 | |
