BMW E39 Miscellaneous

Search our site:

These Car Dusters are made of the finest mop yarn. Mop yarn is made of 85% cotton and 15% polyester. This ratio is very important in determining the quality of the duster in terms of taking the dust off the paint & NOT scratching the paint. To make the duster last longer, the mop yarns are processed with paraffin & then dehydrated. Comes with Storage bag to prevents the duster from getting dry. Dusting your vehicle prior to covering it is essential in preventing paint damage.

These 3-pack Microfiber Polishing Towels measure 16 inches x 16 inches and are ideal for polishing your car's exterior, interior, and wheels. These towels remove excess wax without scratching and are both streak-free and lint-free.

What is the Check Engine light trying to tell me? The BMW Check-Engine light can mean any number of things.
Sometimes it's alerting you to the real need for a repair, but most often it is merely indicating one of the many, simple (top off your coolant, loose gas cap or oil cap) type problems. Imagine paying a hundred dollars to a repair shop to tighten your radiator cap and reset the Check Engine light. Without the R5/FCX, you're stuck staring at your Check Engine light until you see the mechanic who can reset it. Routine Maintenance Lights - As an added benefit, the R5/FCX includes the ability to reset the oil service and inspection, routine maintenance lights. Considering that an oil service for a BMW can sometimes equal the price of the R5/FCX, this feature alone is worth the price of the R5/FCX. Manual and Code book included.
No more driving around with those lights on! Do you change your own oil or go to a fast lube? If you do, then the R5 reset tool is made just for you. The R5 gives you the freedom to reset your own Oil service/Inspection lights, allowing you more choices in service. Super easy to use, takes 15 to 20 seconds, and you don't even have to get your hands dirty! Includes Instructions. It's also highly recommended that you check out our Pelican Technical Article on Reading BMW Fuel Injection Fault Codes.

The BMW airbag light is something that every installer, mechanic, racer and tuner will eventually face. The removal of interior components such as the seat, steering wheel, ECUs, parts of the wiring harness, etc... will cause the airbag light to come on. And it stays on, until a tool is used to reset it. Until now, the only solutions were a trip to the dealer, which will always costs you time and money, or the purchase of a very costly scan and reset tool. With The low cost, R5/SRS, you simply read the code, look up the code in our code book, make sure you know exactly why the airbag light is on, fix the problem, then reset it. That simple.

Dress up your front or rear end with a new emblem. Let the world know who you are as you go whizzing by!

Search our site: