|  | | | BMW E39 Engine Tools - Page 1 | Camshaft Holding Tools | | You need this tool to properly time your camshaft. See how it is used and read our Technical Article on the subject here. |
| 
TOL-3017 | Camshaft Holding Tool/Fixture (includes (2) blocks (1) swivel lock and (1) flywheel locking pin 112-300), Applicable: BMW Motors M42, M44, M50, M52, M54, S50, S52 (BMW Service Tool Reference #11-3-240). Flywheel pin fits most of these models. [More Info] | $159.60 |  | 
TOL-3035 | Camshaft Holding Tool/Fixture, For BMW V-12 Engines (BMW Service Tool Reference #11-3-190) [More Info] | $109.20 | | 
TOL-BMW3059 | Camshaft Holding Tool/Securing Fixture, For Securing the Camshaft Sensor Wheel in Position During Assembly (BMW Service Tool Ref. 11-6-450), For V8 M62 Vanos Engines [More Info] | $193.20 | |
TOL-BMW3062 | Turning Fixture (For adjusting VANOS to left stop during assembly and valve timing on M62 engines), Service manual reference #11-6-440 [More Info] | $37.80 | |
TOL-BMW3058 | Socket, Thinwall (For removal and installation of electro-magnetic solenoid valves for VANOS) Service Tool Reference #11-6-420 [More Info] | $38.60 | | | Cam Sprocket Turning Spanner | | For turning sprockets when removing & installing VANOS Unit on Single VANOS Engines - M50, M52, S50, S52 - Service manual reference# 11 5 490 |
| 
TOL-3044 | Cam Sprocket Turning Spanner Rotation Tool, Service manual reference# 11 5 490, Applicable: BMW engines - M50, M52, S50US, S52US [More Info] | $25.20 | | Chain Tensioner Tools  | | Use this tool in place of the spring-loaded tensioner when timing the camshafts. It's important to use this tool, and not to rely solely on the spring-loaded tensioner - it does not provide enough tension when the car is sitting to accurate time the camshafts. See how it is used here. |
| 
83-30-0-493-548-BOE | Tensioner Pressure Tool, for VANOS Adjustment, fits BMW S50, M50, M60 and M62 Engines (Including X5 models), BMW Service Tool Reference #11-4-230, Each, Note: For models with 1 piece tensioner upgrade, use #11-4-220 tensioner tool
Brand: Genuine BMW [More Info] | $35.50 | | | Timing Tensioner Bracket | 
TOL-BMW3054 | Timing Tensioner Bracket, For Securing the Chain Tensioner While the Top Right Timing Cover is Removed During Vanos Removal and Installation (BMW Service Tool Ref #11-7-380), For M62 Vanos Engines, X5-Series (E53), 5-Series (E39), 7-Series (E38) [More Info] | $51.95 | | 
TOL-BMW3041 | VANOS Air Compressor Adapter, Applicable: BMW engines - M50, M52, M52TU, M54, M56, M62, Each (BMW Service Tool Reference #11-3-450) [More Info] | $21.00 | | 
TOL-BMW3042 | VANOS Cam Sprocket Assembly Jig, Applicable: BMW engines - M52TU, M54, M56, Each (BMW Service Tool Reference #11-6-180) [More Info] | $103.30 | | 
TOL-BMW3043 | VANOS Cam Shaft Alignment Jig, Applicable: BMW engines - M52TU, M54, M56, Each (BMW Service Tool Reference #11-6-150) [More Info] | $195.70 | | 
TOL-BMW3046 | VANOS Rigid Chain Tensioner, Applicable: BMW engines - M52, M52TU, S52, M54, M56, service manual reference #11 4 220, Each (BMW Service Tool Reference #11-4-220), [More Info] | $35.20 | | 
TOL-BMW3047 | VANOS Chain Tensioner Lock Pin, Applicable: BMW engines - M50, M52 (BMW Service Tool Ref# 11 3 292) [More Info] | $9.70 | | 
TOL-BMW3055 | VANOS Cam Timing Master Kit w/ case - 5 Piece, Includes BMW3041, BMW3042, BMW3043, BMW3046, and BMW3047, Each [More Info] | $352.80 | | This kit is exclusively designed to properly Secure and Align the cam and crank shaft during removal and replacement of cylinder head assemblies on BMW V8 engines. This Sir Tools special service tool even comes equipped with the crucial T.D.C. flywheel locking pin needed for setting the crank shaft.
For BMW engines - M60, M62, M62TU. The T.D.C. pin is applicable on BMW engines- M42, M44, M50, M52TU, M60, M62, M62TU. |
| 
TOL-3040 | Cam Timing Master Kit for BMW V8 engines - M60, M62 - BMW3040 Service manual reference# 11 2 440 [More Info] | $415.80 | | Crank Pulley Securing Tools | | These tools bolt to the front of the crankshaft pulley and allow you to secure the engine from turning, allowing you to remove the crank pulley securing nut. |
| 
TOL-3034-1 | Crank Pulley Securing Tool, For M60 and M62 Engines, Each. See BMW service # 11 2 450 [More Info] | $69.70 | | 
TOL-3034-2 | Crank Pulley Securing Tool, For M20, M42 and M50 Engines, Each [More Info] | $58.80 | | 
TOL-3034-3 | Crank Pulley Securing Tool, For BMW M30 Engines, Each [More Info] | $58.80 | | 
TOL-3034 | Crank Pulley Securing Tool Set, Contains All Above Wrenches [More Info] | $159.60 | |
| |
|
|
|
