| BMW E36 Tools - Page 7 |
Transmission Tools |
| 30mm Flange Nut Socket |
| This special 30mm deep walled socket is used to remove both the drive shaft flange nuts and the pinion drive shaft nuts on the differential. |
|
PEL-TOL-3025 | 30mm Flange Nut Socket, BMW All Models, Each [More Info] | $44.50 |  |
| Drain Plug Socket Set |
TOL-BMW3061 | Drain Plug Socket Set of 3, Single Piece Construction, Universal for most BMW applications (Includes 10mm, 14mm, 17mm), Set Note: Please verify size before ordering. [More Info] | $33.95 | |
| Transmission Drain Plug Socket |
| This special 17mm ID socket is used to remove the transmission fill and drain plugs. This tool is essential when doing any transmission service. Please be sure to check first if your transmission uses this type and size of plug before ordering. |
|
PEL-DPR-1017 | Transmission Drain Plug Socket, BMW Models with 17mm allen plugs ONLY, Each [More Info] | $23.90 | |
| Differential Drain Plug Tool |
| This special 10mm Allen wrench is used to remove the differential oil drain plug. |
|
PEL-TOL-3005 | Differential Drain Plug Tool, Fits 10mm Hex Plugs Only, BMW All Models, Each [More Info] | $25.20 | |
| Transmission/Differential Oil Seal Arbors |
| These oil seal arbors are used to properly install the oil seals on the transmission and differential output shafts. |
|
PEL-TOL-3020 | Transmission Oil Seal Arbor For Getrag Transmissions, Check Plate on Transmission for Model Number, All Getrag G242/262/G240 and 260 transmissions, Each 21.00 [More Info] | $35.30 | |
PEL-TOL-3000 | Differential Oil Seal Arbor, BMW All E23, E24, E28, E30 E32 And E34 Models, Each [More Info] | No Longer Available | |
Clutch Tools |
| You can never perform a good job on repairing your BMW if you don't have the right tool. A lot of people try to cut corners because they either don't have the tool they need, or they don't even know that it exists! Having the right tool for the job saves time, money, and wasted effort. A job that can take 4 hours without the right tool, can take a mere few minutes. You're already saving lots of money by doing the work yourself, spend some money and get the tool that you need. Once it's in your collection, you will not know how you got along without it! |
|
| Torx Female Socket Set |
| These odd-shaped sockets are required to remove some of the bolts that connect the engine to the transmission. Seven sizes E-6 through E-16. The three smaller sizes are 1/4" drive; the four larger sizes are 3/8" drive. Made of heat-treated alloy steel. Sockets are kept in a convenient vinyl holder. Includes External Torx Sockets: E6, E7, E8, E10, E12, E14, and E16. |
|
TOL-LIS26750 | Torx Female Socket Set [More Info] | $16.50 | |
| Pilot Bearing Puller |
| Designed to extract bearings and bushings with an I.D. of 12mm up to 15mm. |
|
PEL-TOL-1088 | Pilot Bearing Puller, BMW All Models, Each [More Info] | $52.90 | |
| Clutch Alignment Tools |
PEL-TOL-CABW | Clutch Alignment Tool (Spline count = 10; Pilot diameter = 11.9 mm; Spline diameter = 28.5 mm), Fits BMW M10, M20, M30 engines with 12mm ID pilot bearings only [More Info] | $8.45 | |
PEL-TOL-T183 | Clutch Disc Alignment Tool (Spline count = 10; Pilot diameter = 14.9 mm; Spline diameter = 28.6 mm), Fits BMW M42, M44, M50, S50, S52, M60, M62 engines with 15mm ID pilot bearings only [More Info] | $8.45 | |
