| BMW E36 Tools - Page 4 |
Engine Tools |
| Flywheel Lock Down Kit |
| This 19-Piece Flywheel lock down tool set is used to secure the crankshaft from rotating. Fits practically any vehicle - completely covers all European Cars! |
|
SCHW-PTK-19PCS | Flywheel Lock Down Kit, 19-Piece [More Info] | $85.00 |  |
| Camshaft Holding Tools |
| You need this tool to properly time your camshaft. See how it is used and read our Technical Article on the subject here. |
|
TOL-3017 | Camshaft Holding Tool/Fixture (includes (2) blocks (1) swivel lock and (1) flywheel locking pin 112-300), Applicable: BMW Motors M42, M44, M50, M52, M54, S50, S52 (BMW Service Tool Reference #11-3-240). Flywheel pin fits most of these models. [More Info] | $159.60 | |
TOL-3035 | Camshaft Holding Tool/Fixture, For BMW V-12 Engines (BMW Service Tool Reference #11-3-190) [More Info] | $109.20 | |
| Camshaft Removal and Installation Tool |
| Here is an affordable version of the factory tool that allows easy camshaft removal and installation. All joints are MIG welded. Instructions included. |
|
PEL-CAM-TOOL | BMW Camshaft Removal and Installation Tool, E36 M3 (1993-99) S52 [More Info] | Temporarily unavailable | |
| Cam Sprocket Turning Spanner |
| For turning sprockets when removing & installing VANOS Unit on Single VANOS Engines - M50, M52, S50, S52 - Service manual reference# 11 5 490 |
|
TOL-3044 | Cam Sprocket Turning Spanner Rotation Tool, Service manual reference# 11 5 490, Applicable: BMW engines - M50, M52, S50US, S52US *Note: This tool only needed for Later Vanos Engines with the Diaphragm Spring located between the Intake Cam stop disks. Not required for Models thru 2/95 [More Info] | $25.20 | |
| Crank Pulley Securing Tools |
| These tools bolt to the front of the crankshaft pulley and allow you to secure the engine from turning, allowing you to remove the crank pulley securing nut. |
|
TOL-3034-1 | Crank Pulley Securing Tool, For M60 and M62 Engines, Each. See BMW service # 11 2 450 [More Info] | $69.70 | |
TOL-3034-2 | Crank Pulley Securing Tool, For M20, M42 and M50 Engines, Each [More Info] | $58.80 | |
TOL-3034-3 | Crank Pulley Securing Tool, For BMW M30 Engines, Each [More Info] | $58.80 | |
TOL-3034 | Crank Pulley Securing Tool Set, Contains All Above Wrenches [More Info] | $159.60 | |
| Steering Rack Pin Wrenches |
| This wrench is used to remove and install the slotted nut on the steering rack on BMW E30 3 Series models. This tool is required if you are replacing your steering rack seals. |
|
TOL-3031 | Steering Rack Pin Wrench, For All E30 3 Series Models (1984-92), Each [More Info] | $42.00 | |
| Universal Oil Seal Extractors |
| This oil seal extractor allows you to safely remove oil seals from components such as crankshafts, camshafts and just about anywhere else there is an oil seal that needs replacing. It's universal style design allows it to be used on not only BMW's but other cars as well. |
|
TOL-3019 | Universal Oil Seal Extractor, All BMW Engines, Each [More Info] | No Longer Available | |
