| BMW E36 Axles & Bearings - Page 5 |
Turner Motorsport Racing Delrin Differential Mounts  |
| E36 Racing Delrin Differential Mount. This is a solid, non-compliant mount for racing use only. We recommend installing these with solid subframe bushings only. |
|
PEL-TDR3080007 | Turner Motorsport Racing Delrin Differential Mount, E36 3 Series, All
Brand: TMS [More Info] | $46.95 |  |
Turner Motorsport E36 Solid Racing Rear Subframe Bushing Kit |
| TMS E36 solid sub-frame bushings are designed around current SCCA SPEED World Challenge regulations, and developed by the TMS WC race team. A BMWs subframe is the heart of the suspension. When the subframe moves, so do all the suspension mounting points. Replace the stock rubber bushings to limit drivetrain and suspension movement and keep your car setup the way its supposed to be. Solid bushings will also help keep the subframe from tearing out of the chassis. One front bushing is slotted to allow for compliance between manufacturing standards as BMW specifies. These bushings are CNC machined out of high grade billet aluminum. |
|
PEL-TDR3080002 | Turner Motorsport Solid Racing Rear Subframe Bushing Kit, Set of 4 bushings, E36 3 Series, All Except 318ti
Brand: TMS [More Info] | $225.95 | |
PEL-TDRZ380444 | Turner Motorsport Solid Racing Rear Subframe Bushing Kit, Set of 2 bushings, 318ti (1995-99)
Brand: TMS [More Info] | $169.00 | |
Turner Motorsport Front Subframe Reinforcement Kit |
| As E36s get older and see more track-use, they start develop cracks and bends in places that see a lot of stress. One of the most stressful areas is the front subframe. It's a good idea to reinforce your front subframe the next time you're doing any suspension work. This kit reinforces the upper and lower tabs of the subframe where the motor mount is located. Requires welding. |
|
PEL-TDR3675301 | Turner Motorsport Front Subframe Reinforcement Kit, E36 3 Series, All
Brand: TMS [More Info] | $44.95 | |
Turner Motorsport E36 Delrin/Aluminum Differential Mounts |
| TMS E36 solid differential bushings are designed around SCCA SPEED World Challenge regulations and have years of street and track testing to prove their performance. Replacing your diff's rubber mounts with this kit will result in a snappier feel when cornering and better suspension performance. This kit will also prevent the front differential mount from loosening up or shearing -- a very common problem with the E36. The rear two differential cover bushings are slotted to allow for compliance between manufacturing standards as BMW specifies. These bushings are CNC machined from high-grade billet aluminum and Delrin. The kit includes 3 pieces: a Delrin front mount and 2 aluminum rear mounts. |
|
PEL-TDR3680001 | Turner Motorsport Delrin/Aluminum Differential Mount Kit, (3 Piece Set), E36 3 Series, All
Brand: TMS [More Info] | $139.95 | |
Lug Nuts and Bolts |
| 36-13-1-113-131-BOE | Lug Nut, For Steel Wheels, 3 Series, All (1992-99)
Brand: Genuine BMW [More Info] | $4.25 | |
36-13-1-113-132-M36 | Lug Nut, For Alloy Wheels, 3 Series, All (1992-99)
Brand: Febi [More Info] |  |
| $4.00 | |
36-13-1-126-191-M58 | Lug Bolt, Gold Cadmium Plated, fits various wheel styles (12.5 x 1.5 mm), Sold Per Each
Brand: OEM [More Info] | |
| $1.50 | |
| 33-17-1-090-824-BOE | Bolt for Upper Rear Control Arm, BMW E36 3 Series, All, Each
Brand: BMW OEM [More Info] | $5.15 | |
Wheel Hanger Tool |
| This tool screws into one of the wheel stud holes to make it easier to mount or remove the wheels on your car. It is manufactured from pure brass with a polished finish for easy sliding of the wheel without any damage. Not only does this make wheel installation quicker and easier, but it also helps avoid knocking of the wheels into your painted calipers, which can normally lead to unsightly scuffing. |
|
RB-BWH-12MM | Wheel Hanger Tool, Brass, fits models that use 12 x 1.5mm lug bolts, each [More Info] | $24.95 | |
