|  | | | BMW E36 Fuel System - Page 3 | Fuel Tank Level Senders | | Fuel Tank Sending Unit Locking Rings | 
16-11-1-181-142-M9 | Locking Ring for in Tank Fuel Pump & Sending Unit, E36 3 Series (All),
Brand: Genuine BMW [More Info] |  |
| $14.25 |  | | Fuel Tank Hose Kits | 
16-11-1-181-361-M9 | Fuel Tank Hose Kit, Fuel Lines, Fuel Hose & Clamps for Mounting Fuel Tank, 325i/iC/is (1992-12/94), 318i/is/iC M42 Engine (1992-99), M3 (through 12/94), Each
Brand: Genuine BMW [More Info] | |
| $88.00 | | Fuel Vapor System Parts | 
13-90-1-744-150-M9 | Fuel Tank Breather Valve, 318i/is/iC with M44 Engine (1996-99), 318ti with M44 Engine (1996-99), 323i/is/iC (1996-99), 328i/is/iC (1996-99), M3 w/ B32 (1996-99), Each
Brand: Genuine BMW [More Info] | |
| $96.00 | | Fuel Injectors  | | Engine not getting enough fuel? Injectors a bit clogged from bad fuel and filters? Replace them with genuine Bosch OEM injectors. On older cars, it's sometimes surprising how much better a car can run with new fuel injectors, it's also a good idea to replace the fuel filter at the same time to ensure that fresh clean fuel is reaching your new injectors. NOTE: Injectors DO NOT come with injector seals. Injector seals are listed below. |
| | Fuel Injectors | 
13-64-1-466-116-M242 | Fuel Injector (Rebuilt - CORE CHARGE APPLIES), 318i/is/iC (through 12/93), Each
Brand: GB Remanufacturing [More Info] | |
| $42.25 | | 
13-64-1-247-196-M242 | Fuel Injector (Rebuilt - CORE CHARGE APPLIES), 318i/is/iC (1/94-99), 318ti (1995-99), Each
Brand: GB Remanufacturing [More Info] | |
| $43.50 | | 
13-64-1-730-060-M14 | Fuel Injector, 323i/is/iC (1996-99), 325i/is/iC (1992-95), M3 with 3.0L Engine (1995), Each
Brand: Bosch [More Info] | |
| $124.50 | | 
13-64-1-730-060-M242 | Fuel Injector, Rebuilt, 323is/iC (1996-99), 325i/is/iC (1992-95), M3 with 3.0L Engine (1995), Each
Brand: GB Manufacturing [More Info] | |
| $42.25 | | 
13-64-1-703-819-M242 | Fuel Injector, Rebuilt, 328i/is/iC (1996-99), M3 With 3.2L Engine (1996-99), Each
Brand: GB Manufacturing [More Info] | |
| $42.25 | | | Fuel Injector Seals | 
13-64-1-730-767-M213 | Fuel Injector Seal, BMW E36 3 Series, All (1992-99), 2 seals per injector, sold individually
Brand: D P H [More Info] | |
| $1.25 | | | Fuel Injector Clamps/Clips | | These are required to maintain a good seal from the injector to the fuel rail. |
| 
13-53-1-274-729-M9 | Securing Clip for Fuel Injector, BMW E36 3 Series, All (1992-99), As Needed
Brand: Genuine BMW [More Info] | |
| $1.25 | | 
07-12-9-952-104-M58 | Fuel Hose Clamp, for o.d. of 12 to 15mm, BMW E36 3 Series, All (1992-99), As Needed
Brand: OEM [More Info] | |
| $1.25 | | Fuel Pressure Regulators | | Make sure that your fuel injection system is running properly and at the correct fuel pressure. Changes in the fuel pressure can affect the power and performance of the engine and can be potentially dangerous. Most pressure regulators are quite simple in design, A small valve inside of the regulator allows fuel pressure to build up to the amount needed for the fuel injection system to work properly. If too much pressure is in the line, the valve automatically opens and bleeds off the increased pressure, thus keeping your fuel pressure within operating tolerances. If the unit goes bad, it can cause the pressure in the fuel lines to increase or decrease, possibly causing a dangerous situation. |
| | Fuel Pressure Regulators | 
13-53-1-743-378-M14 | Fuel Pressure Regulator, 3.0 Bar, 318i/is/iC with M42 Engine (1992-95), 318ti with M42 Engine (1995)
Brand: Bosch [More Info] | |
| $96.50 | | 
13-53-1-436-110-M14 | Fuel Pressure Regulator, 3.5 Bar, 318i/is/iC with M44 Engine (1996-99), 318ti with M44 Engine (1996-99), 325i/is/iC (1992-95), 328i/is/iC (1996-99), M3 (1995-99)
Brand: Bosch [More Info] | |
| $58.00 | | 
13-53-1-729-319-M9 | Fuel Pressure Regulator (3.5 bar), NOTE: Does not include control valve assembly, E36 325i/iC/is (from 1/95), 323is/iC, 328i/is/iC, M3 B32, Each
Brand: Genuine BMW [More Info] | |
| $87.00 | |
| |
|
|
|
