| BMW E36 Engine Tools - Page 2 |
Head Bolt Tool |
83-30-0-490-856-BOE | Torx Socket for Head Bolts, for late BMW 4-valve models (M42, M43, M44, M50, M60, M62, S50, S52) (BMW Service Tool Reference #11-2-250)
Brand: Genuine BMW [More Info] | $64.00 |  |
| Torque Angle Meter |
| For all torque-to-yield fastener applications. Use with 1/2" Drive. Fits models requiring precise torque angle when tightening cylinder head bolts, M10, M20, M21, M30, M40, M41, M42, M43, M44, M50, M52, M54, M57,M60, M62, M70, M73, S14, S38, S50, S52, S62 (BMW Service Tool Reference #00-9-120) |
|
TOL-LIS28100 | Torque Angle Meter, 1/2" Drive (BMW Service Tool Reference #00-9-120) [More Info] | $37.98 | |
Camshaft Holding Tool  |
| You need this tool to properly time your camshaft. See how it is used and read our Technical Article on the subject here. |
|
TOL-3017 | Camshaft Holding Tool/Fixture (includes (2) blocks (1) swivel lock and (1) flywheel locking pin 112-300), Applicable: BMW Motors M42, M44, M50, M52, M54, S50, S52 (BMW Service Tool Reference #11-3-240). Flywheel pin fits most of these models. [More Info] | $159.60 | |
TOL-3035 | Camshaft Holding Tool/Fixture, For BMW V-12 Engines (BMW Service Tool Reference #11-3-190) [More Info] | $109.20 | |
| Camshaft Removal and Installation Tool |
| Here is an affordable version of the factory tool that allows easy camshaft removal and installation. All joints are MIG welded. Instructions included. |
|
PEL-CAM-TOOL | BMW Camshaft Removal and Installation Tool, E36 M3 (1993-99) S52 [More Info] | Temporarily unavailable | |
| Cam Sprocket Turning Spanner |
| For turning sprockets when removing & installing VANOS Unit on Single VANOS Engines - M50, M52, S50, S52 - Service manual reference# 11 5 490 |
|
TOL-3044 | Cam Sprocket Turning Spanner Rotation Tool, Service manual reference# 11 5 490, Applicable: BMW engines - M50, M52, S50US, S52US *Note: This tool only needed for Later Vanos Engines with the Diaphragm Spring located between the Intake Cam stop disks. Not required for Models thru 2/95 [More Info] | $25.20 | |
Timing Chain Crimping Tools |
This tool is used in order to crimp together the master link of your BMW's timing chain.
NOTE: Must be used in conjunction with adapter bit #TOL-M-0050-B (sold separately). |
|
TOL-M-0050-SIR | Timing Chain Crimping Tool, Adaptor Bit Not Included, All BMW Engines With Timing Chains, Each [More Info] | $158.80 | |
TOL-M-0050-B | Timing Chain Crimping Tool Adaptor Bit, For All BMW Timing Chains, Each [More Info] | $43.60 | |
Tappet Depressors |
| This tool is used on M engines to preload the cam follower in order to remove/replace valve adjustment shims. |
|
TOL-3012 | Tappet Depressor, BMW, For All M Models Except European Cars, Each [More Info] | $117.60 | |
Universal Valve Spring Compressor |
With this latest evolution to our Universal Valve Spring Tool we have added the ability to actuate the compression tube even in tight confined locations like under the cowl where the lever cannot be moved or may not even fit. By adding the ability to separate the lever from the compression tube anywhere along the bar you can compress the springs that are confined by brake boosters, AC housings or other factors by locating the lever along the bar where there is open space.
• Access to valves in areas that are not in open areas with engine in vehicle
• Valve springs can be depressed "remotely", depressor bar and compression tube are separate
• Complete universal kit with multi adjustable points
• No need to remove engine due to confined areas saving time
• No other valve spring compressor is as universal and adjustable
• Depressor tube slides easily to each valve location without changing settings
• All components store neatly in a blow molded box |
|
TOL-SP91400B | Universal Valve Spring Compressor [More Info] | $156.24 | |
