|  | | | BMW E36 Main Engine Components - Page 8 | Tensioner Conversion | | These parts are used for converting cars from mechanical to hydraulic water pump/alternator belt tensioners. In addition to the hydraulic tensioner, a conversion kit must also be purchased. This conversion kit contains: (1) Adjusting Pulley, (2) Protection Caps, (2) Bolts, (2) Washers, (1) Dust Guard, (1) Screw. |
| 
11-28-7-838-797-M40 | Drive Belt Tensioner with Base Plate and Pivot Arm for Water Pump/Alternator Belt (Shock Type Hydraulic), NOTE: When converting cars originally equipped with mechanical tensioner also use (1) 09-0434-001 Conversion Kit - BMW E36 325i/iC/is, 323is/iC, 328i/is/iC, M3 B30/B32 [More Info] |  |
| $65.75 |  | 
09-0434-001-M40 | Conversion Kit for Drive Belt Tensioner - BMW E36 325i/iC/is, 323is/iC, 328i/is/iC, M3 B30/B32 [More Info] | |
| $31.75 | | Head Bolt Set  | | Rebuilding your engine? Why take risks with old hardware? Use OEM original bolts when reassembling your engine. Head bolts have a tendency to stretch when they are initially torqued, so it's good insurance to use new bolts during re-assembly. |
| | Cylinder Head Bolt Sets | | Cylinder Head Bolt Set, 318i/is/iC (1992-98), 318ti (1995-99) | | 11-12-1-721-939-M17 | Cylinder Head Bolt Set, 318i/is/iC (1992-98), 318ti (1995-99)
Brand: Victor Reinz [More Info] | |
| $13.50 | | | 11-12-1-721-939-M61 | Cylinder Head Bolt Set, 318i/is/iC (1992-98), 318ti (1995-99)
Brand: Meistersatz [More Info] | |
| $13.50 | |
| | Cylinder Head Bolt Set, 323i/is/iC (1996-99), 325i/is/iC (1992-95), 328i/is/iC (1996-99), M3 (1995-99) | 
11-12-1-721-938-M17 | Cylinder Head Bolt Set, 323i/is/iC (1996-99), 325i/is/iC (1992-95), 328i/is/iC (1996-99), M3 (1995-99)
Brand: Victor Reinz [More Info] | |
| $14.75 | | | 11-12-1-721-938-M61 | Cylinder Head Bolt Set, 323i/is/iC (1996-99), 325i/is/iC (1992-95), 328i/is/iC (1996-99), M3 (1995-99)
Brand: Meistersatz [More Info] | |
| $17.25 | | Turner Motorsport Underdrive Power Pulley Kits | | As used TMS' racecars and street cars, these are engineered not only to be the best pulley kits on the market but also to provide the best compromise between performance and reliability. Specifically, TMS has designed them to underdrive the water pump, power steering pump and alternator*. Adding these is like getting FREE HORSEPOWER - there are no downsides and underdriving each of these accessories has been proven safe through years of on and off-track use. TMS does not believe it is safe to change the crankshaft pulley due to the potential harm to the crankshaft. These kits provide a 10%-20% overall reduction in driving your car's systems and have been dyno-tested with a gain of up to 11hp. Kit includes water pump, power steering, alternator pulleys and belt. The T-6061 hard anodized aluminum pulleys account for a 10 to 20-percent decrease in accessory speeds, reducing the load on the engine but still maintaining a safe margin for reliability on all components. Installation involves removing the fan for easy access to the front of the engine. The main drive belt comes off easy and each pulley is mounted with Allen head bolts. Typical installation time is 1.5 hours. New main drive belt is included. The pulleys were good for 10.7 hp at 6960 rpm and 8.1 lb-ft of torque at 5550 on the 1995 M3. *Alternator pulleys - There are two kits available. One for cars with Bosch Alternators and the other for cars with Valeo alternators. Please confirm which alternator your car has prior to ordering. |
| 
PEL-PPK-E36B | Turner Motorsport Underdrive Power Pulley Kit, E36 3 Series, All 6 Cylinder Models With Bosch Alternators
Brand: TMS [More Info] | $249.00 | |
PEL-PPK-E36V | Turner Motorsport Underdrive Power Pulley Kit, E36 3 Series, All 6 Cylinder Models With Valeo Alternators
Brand: TMS [More Info] | $249.00 | | Turner Motorsport Solid Motor and Transmission Mount Kit | | TMS solid mount kits will hold up to the abuse that a powerful, high revving race motor will induce. The main benefit is that they reduce the torque and power lost from rubber mounting movement. Rubber mounts absorb the energy and vibrations produced from the torque of the motor. By not allowing that motion and energy to be absorbed, more power is transmitted faster. The solid engine mounts locate the engine in the original orientation, but 5mm lower, and the transmission mounts are 1mm lower than the original mounts and are also located in the original orientation. This lowers the cars center of gravity and improves the overall handling of the car. Solid mounting kits should be used for race only applications. These are the exact mounts used in TMS' SPEED World Challenge race cars. Subframe reinforcement kits are highly recommended to go along with this kit to reduce the risk of damage to the subframe. We highly recommend using the transmission and engine mounts together and installing this as a complete kit. Mixing a rubber mount with a metal mount will cause undue stress on the mouting points. This kit fits all E36 6 cylinder models. |
| 
PEL-TDR9980001 | Turner Motorsport Solid Motor and Transmission Mount Kit, E36 3 Series, All 6 Cylinder Models
Brand: TMS [More Info] | $249.95 | | Motor Mounts | | Is your motor shaking like it's at the epicenter of one of those famous California earthquakes? Check your motor mounts. Chances are that they are worn, and are causing excess vibration. |
| 
11-81-1-141-377-M270 | Engine Mount, Left or Right, 2 Per Car, 318i/is/iC (1992-98), 318ti (1995-99)
Brand: Corteco [More Info] | |
| $54.25 | | | Engine Mount, Left or Right, 2 Per Car, E36 325i/is, 323is, 323iC (auto trans), 328i/is, 328iC (from 8/96 auto trans), Each | 
22-11-6-779-970-M270 | Engine Mount, Left or Right, 2 Per Car, E36 325i/is, 323is, 323iC (auto trans), 328i/is, 328iC (from 8/96 auto trans), Each
Brand: Corteco [More Info] | |
| $48.25 | | 
22-11-6-779-970-M10 | Engine Mount, Left or Right, 2 Per Car, E36 325i/is, 323is, 323iC (auto trans), 328i/is, 328iC (from 8/96 auto trans), Each
Brand: Sachs-Boge [More Info] | |
| $51.50 | |
| 
11-81-1-141-735-M9 | Engine Mount, Left, Convertibles only, 323iC manual trans, 325iC/328iC
Brand: Genuine BMW [More Info] | |
| $55.00 | | 
11-81-1-141-736-M9 | Engine Mount, Right, Convertibles only, 323iC manual trans, 325iC/328iC
Brand: Genuine BMW [More Info] | |
| $55.00 | | 
11-81-2-283-798-M270 | Engine Mount, E36 M3 (Left or Right)
Brand: Corteco [More Info] | |
| $58.00 | | | 11-81-2-224-413-BOE | Engine Mount Left or Right NOTE: Motorsport Version (Reinforced Mount), M3 (1995-99)
Brand: Genuine BMW [More Info] | $442.00 | |
| |
|
|
|
