|  | | | BMW E36 Filters & Belts - Page 3 | Engine Belts | | Drive Belt Tensioners | | Some cars came with mechanical water pump/alternator belt tensioner assemblies while others came with a hydraulic type. Note that the mechanical style is only available as an assembly - the bearing or pulley is not available separately. Therefore, it is important to identify which style is on your vehicle BEFORE placing your order. |
| 
11-28-1-717-188-M40 | Belt Tensioner for Water Pump/Alternator Belt (Shock Type Hydraulic), E36 325i/iC/is, 328i/is/iC, M3
Brand: INA [Photo] |  |
| $55.00 |  | 
11-28-1-427-252-M40 | Drive Belt Tensioner for Water Pump/Alternator Belt (Mechanical), E36 325i/iC/is, 323is/iC, 328i/is/iC
Brand: INA [Photo] | |
| $44.50 | | 
11-28-1-432-104-M40 | Drive Belt Tensioner for Water Pump/Alternator Belt (Mechanical), 318i/is/iC with M44 Engine (1992-99), 318ti (1995-99), Z3 1.9 M44, Each
Brand: INA [Photo] | |
| $51.25 | | Microfilters (Pollen Filters) | | BMW E36 3 Series models have a unique outside air filtration system that uses a small filter mounted behind the dash. Over time, these filters become clogged with outside contaminants and even leaves, causing your ventilation system to lose efficiency. While not as hermetically safe as duct tape and plastic sheeting, replacement of this filter will get clean fresh air flowing through your car once again. Replacement is easy with our Pelican Tech Article on BMW E36 Microfilter Replacement. |
| 
64-11-9-069-895-M87 | Microfilter for A/C System, 318i/is/iC (1992-99), 323i/is/iC (1996-99), 325i/is/iC (1992-95), 328i/is/iC (1996-99), M3 (1995-99), Each
Brand: Micronair [Photo] [Photo] | |
| $18.75 | | 
64-31-9-071-933-M276 | Microfilter for A/C System (2 per car, sold per each), 318ti (1995-99), Each
Brand: [Photo] | |
| $23.75 | | Valve Cover Gaskets | | These gaskets should be replaced every time that you adjust your valves. You should also put a little gasket sealer on the inside of the cover where the gasket mounts to the cover. This should prevent the oil leaks that sometimes occur when there isn't a really good seal. |
| 
11-12-1-721-876-M30 | Valve Cover Gasket, Does Not Include Spark Plug Sealing Rings, 318i/is/iC (1992-98), 318ti (1995-99), Each
Brand: Elring Klinger [Photo] | |
| $11.25 | | 
11-12-0-034-106-M61 | Valve Cover Gasket Set, Includes Spark Plug Sealing Gaskets, 325i/is/iC (thru 08/92)
Brand: Meistersatz [Photo] | |
| $17.75 | | | Valve Cover Gasket Set, Includes Spark Plug Sealing Gaskets, 325i/is/iC (09/92-95), M3 With 3.0L Engine (1995) | 
11-12-0-034-107-M17 | Valve Cover Gasket Set, Includes Spark Plug Sealing Gaskets, 325i/is/iC (09/92-95), M3 With 3.0L Engine (1995)
Brand: Victor Reinz [Photo] | |
| $28.00 | | 
11-12-0-034-107-M30 | Valve Cover Gasket Set, Includes Spark Plug Sealing Gaskets, 325i/is/iC (09/92-95), M3 With 3.0L Engine (1995)
Brand: Elring Klinger [Photo] | |
| $24.75 | |
| | Valve Cover Gasket Set, Includes Spark Plug Sealing Gaskets (also use 11-12-1-437-395-M208 valve cover nut seals), E36 323is/iC (1996-99), 328i/is/iC (1996-99), M3 B32 (1996-99) | 
11-12-0-034-108-M17 | Valve Cover Gasket Set, Includes Spark Plug Sealing Gaskets (also use 11-12-1-437-395-M208 valve cover nut seals), E36 323is/iC (1996-99), 328i/is/iC (1996-99), M3 B32 (1996-99)
Brand: Victor Reinz [Photo] | |
| $25.00 | | 
11-12-0-034-108-M58 | Valve Cover Gasket Set, Includes Spark Plug Sealing Gaskets (also use 11-12-1-437-395-M208 valve cover nut seals), E36 323is/iC (1996-99), 328i/is/iC (1996-99), M3 B32 (1996-99)
Brand: OEM [Photo] | |
| $30.50 | | 
11-12-0-034-108-M30 | Valve Cover Gasket Set, Includes Spark Plug Sealing Gaskets (also use 11-12-1-437-395-M208 valve cover nut seals), E36 323is/iC (1996-99), 328i/is/iC (1996-99), M3 B32 (1996-99)
Brand: Elring Klinger [Photo] | |
| $23.00 | | | Spark Plug Hole Seals | 
11-12-1-721-475-M16 | Spark Plug Hole Seal, 1 Per Car, With Extra Hole For Valve Cover Mounting Bolt, 318i/is/iC (1992-98), 318ti (1995-99), Each
Brand: Bruss [Photo] | |
| $2.25 | | 
11-12-1-721-476-M16 | Spark Plug Hole Seal, 3 Per Car, 318i/is/iC (1992-98), 318ti (1995-99), Each
Brand: Bruss [Photo] | |
| $1.50 | | | Valve Cover Mounts | 
11-12-1-730-356-M36 | Rubber Mount for Valve Cover, 2 Per Car, 325i/is/iC (1992-95), M3 With 3.0L Engine (1995)
Brand: Metzeler [Photo] | |
| $3.50 | | | Valve Cover Bolt Seal | 
11-12-1-721-879-M17 | Valve Cover Bolt Seal (15 per car, sold per each), E36 318i/is/iC/ti, Each
Brand: Victor Reinz [Photo] | |
| $0.50 | | 
11-12-1-437-395-M208 | Valve Cover Nut Seal (sold per each), 15 Per Car: E36 323is/iC, 325i/is/iC, 328i/is/iC, M3 B30/B32
Brand: Gloeckler [Photo] | |
| $1.00 | | 
11-12-1-738-607-M9 | Valve Cover Cap Nut, Includes Washer and Seal, As Needed, Each
Brand: Genuine BMW [Photo] | |
| $4.50 | |
| |
|
|
|
