| BMW E34 Engine Tools - Page 1 |
Camshaft Holding Tools |
| You need this tool to properly time your camshaft. See how it is used and read our Technical Article on the subject here. |
|
TOL-3017 | Camshaft Holding Tool/Fixture (includes (2) blocks (1) swivel lock and (1) flywheel locking pin 112-300), Applicable: BMW Motors M42, M44, M50, M52, M54, S50, S52 (BMW Service Tool Reference #11-3-240). Flywheel pin fits most of these models. [More Info] | $159.60 |  |
TOL-3035 | Camshaft Holding Tool/Fixture, For BMW V-12 Engines (BMW Service Tool Reference #11-3-190) [More Info] | $109.20 | |
Cam Sprocket Turning Spanner |
| For turning sprockets when removing & installing VANOS Unit on Single VANOS Engines - M50, M52, S50, S52 - Service manual reference# 11 5 490 |
|
TOL-3044 | Cam Sprocket Turning Spanner Rotation Tool, Service manual reference# 11 5 490, Applicable: BMW engines - M50, M52, S50US, S52US *Note: This tool only needed for Later Vanos Engines with the Diaphragm Spring located between the Intake Cam stop disks. Not required for Models thru 2/95 [More Info] | $25.20 | |
Crank Pulley Securing Tools |
| These tools bolt to the front of the crankshaft pulley and allow you to secure the engine from turning, allowing you to remove the crank pulley securing nut. |
|
TOL-3034-1 | Crank Pulley Securing Tool, For M60 and M62 Engines, Each. See BMW service # 11 2 450 [More Info] | $69.70 | |
TOL-3034-2 | Crank Pulley Securing Tool, For M20, M42 and M50 Engines, Each [More Info] | $58.80 | |
TOL-3034-3 | Crank Pulley Securing Tool, For S38 and M30 Engines, Each [More Info] | $58.80 | |
TOL-3034 | Crank Pulley Securing Tool Set, Contains All Above Wrenches [More Info] | $159.60 | |
Universal Oil Seal Extractors |
| This oil seal extractor allows you to safely remove oil seals from components such as crankshafts, camshafts and just about anywhere else there is an oil seal that needs replacing. It's universal style design allows it to be used on not only BMW's but other cars as well. |
|
TOL-3019 | Universal Oil Seal Extractor, All BMW Engines, Each [More Info] | No Longer Available | |
Oil Seal Arbors |
| This tool is used to properly install the oil seal on the pulley side of the crankshaft on BMW engines. Be sure to order the correct tool for your application |
|
TOL-3018 | Oil Seal Arbor, For BMW M20 Engines, Each [More Info] | No Longer Available | |
TOL-3001 | Oil Seal Arbor Kit, For M10 and M30 Engines, Each [More Info] | No Longer Available | |
Engine Turning Bars |
| These handy engine turning bars are used to rotate the engine using the timing chain. A great tool to have if you are setting the timing on your car or adjusting the valves. |
|
TOL-3015 | Engine Turning Bar, For All BMW 4 and 6 Cylinder Engines With a Single Timing Chain, Each [More Info] | $88.20 | |
TOL-3016 | Engine Turning Bar, For All BMW 4 and 6 Cylinder Engines With a Dual Row Timing Chain, Each [More Info] | $53.80 | |
