|  | | | BMW E30 Clutch & Flywheel - Page 3 | Clutch Discs | | Clutch Alignment Tool | 
PEL-TOL-CABW | Clutch Alignment Tool (Spline count = 10; Pilot diameter = 11.9 mm; Spline diameter = 28.5 mm), Fits BMW M10, M20, M30 engines with 12mm ID pilot bearings only [More Info] | $8.45 |  | 
PEL-TOL-T183 | Clutch Disc Alignment Tool (Spline count = 10; Pilot diameter = 14.9 mm; Spline diameter = 28.6 mm), Fits BMW M42, M44, M50, S50, S52, M60, M62 engines with 15mm ID pilot bearings only [More Info] | $8.45 | | Throw Out Bearings  | | You should always throw out your old throw-out bearing every time that you replace your clutch disc and pressure plate. A loud squeak when the clutch pedal is pressed in can indicate that there is a problem with your throw-out bearing. This can also indicated a flywheel pilot bearing problem as well. |
| 
21-51-7-521-471-M38 | Throw Out-Bearing, 318i (1984-85), 318i/is/iC (1991), 325/e/es/i/is/iC/iX (1984-91), M3 (1987-91)
Brand: Sachs [More Info] |  |
| $43.75 | | 
21-51-1-204-525-M38 | Throw Out-Bearing, 323i European Models Only (through 2/84),
Brand: Sachs [More Info] | |
| $75.00 | | 
21-51-2-226-729-M38 | Throw Out Bearing, M3 (1987-91)
Brand: Sachs [More Info] | |
| $43.75 | | Clutch Release Forks | | It's common to replace your clutch release fork if it shows signs of wear, appears bent or shows cracking under stress. Even the best looking release forks may often fail. If your clutch has had a very 'heavy' feel to it prior to performing your clutch job, then you might have placed a lot of force on the clutch release fork, which has a tendency to weaken it. It's good practice to replace it while you are doing a clutch job as it is a relatively inexpensive part. Also replace the pivot pin at the same time for extra insurance, and do the job right the first time. |
| | Clutch Release Fork, 318i (1984-85), 318i/is/iC (1991), 325/e/es/i/is/iC/iX (1984-91), M3 (1987-91) | 
21-51-1-204-229-M9 | Clutch Release Fork, 318i (1984-85), 318i/is/iC (1991), 325/e/es/i/is/iC/iX (1984-91), M3 (1987-91)
Brand: Genuine BMW [More Info] | |
| $16.75 | | 
21-51-1-204-229-M200 | Clutch Release Fork, 318i (1984-85), 318i/is/iC (1991), 325/e/es/i/is/iC/iX (1984-91), M3 (1987-91)
Brand: MTC [More Info] | |
| $10.25 | | | Clutch Release Pivot Pins | 
21-51-1-202-659-M200 | Pivot Pin for Clutch Release Fork, 318i (1984-85), 318i/is/iC (1991), 325/e/es/i/is/iC/iX (1984-91), M3 (1987-91)
Brand: MTC [More Info] | |
| $1.25 | | | The original clutch pivot pins are made of plastic, which make them susceptible to wear out prematurely or fail. AGA's silicon bronze pivot pins offer superior wear characteristics, especially in high heat and high performance clutch applications. Click here for Installation Instructions. |
| 
21-51-1-202-659-M744 | Silicon Bronze Pivot Pin, 318i (1984-85), 318i/is/iC (1991), 325/e/es/i/is/iC/iX (1984-91), M3 (1987-91)
Brand: AGA [More Info] | |
| $32.50 | | | Clutch Release Spring | 
21-51-1-204-327-M9 | Spring for Clutch Release Fork, 318i (1984-85), 318i/is/iC (1991), 325/e/es/i/is/iC/iX (1984-91), M3 (1987-91)
Brand: Genuine BMW [More Info] | |
| $2.50 | | Pilot Bearings | | The pilot bearing acts to center the input shaft of the transmission inside the flywheel. You should always replace the pilot bearing whenever the clutch is replaced. You may also need the flywheel bearing puller if you do not have one already. |
| | Pilot Bearing, Ball Type, 12mm hole, 318i (1984-86), 318i/is (through 8/90), 325/e/es/i/is/iC/iX (1984-91), M3 (1987-91) | 
11-21-1-709-681-M40 | Pilot Bearing, Ball Type, 12mm hole, 318i (1984-86), 318i/is (through 8/90), 325/e/es/i/is/iC/iX (1984-91), M3 (1987-91)
Brand: INA [More Info] | |
| $6.50 | | 
11-21-1-709-681-M92 | Pilot Bearing, Ball Type, 12mm hole, 318i (1984-86), 318i/is (through 8/90), 325/e/es/i/is/iC/iX (1984-91), M3 (1987-91)
Brand: SKF [More Info] | |
| $9.50 | |
| | Pilot Bearing, 15mm hole, 318i/is/iC (9/90-1991), Each | 
11-21-1-720-310-M40 | Pilot Bearing, 15mm hole, 318i/is/iC (9/90-1991), Each
Brand: INA [More Info] | |
| $7.50 | | 
11-21-1-720-310-M296 | Pilot Bearing, 15mm hole, 318i/is/iC (9/90-1991), Each
Brand: NTN [More Info] | |
| $11.00 | |
| |
|
|
|
