| BMW E30 Specialty Tools - Page 4 |
Oxygen Sensor Removal Tools |
Ever have trouble getting the O2 Sensor out? Well, no more with these handy tools!
NOTE: We generally recommend the Crowsfoot Socket for easier access. While the Tube Socket may provide a more secure fitment, it requires much more clearance and wire splicing to use correctly. |
|
PEL-4491B | 22mm Oxygen Sensor Crowsfoot Socket, BMW All Models, Each [More Info] | $25.95 |  |
TOL-4491A | 22mm Oxygen Sensor Tube Socket, BMW All Models, Each [More Info] | $36.10 | |
Flywheel Lock Down Kit |
| This 19-Piece Flywheel lock down tool set is used to secure the crankshaft from rotating. Fits practically any vehicle - completely covers all European Cars! |
|
SCHW-PTK-19PCS | Flywheel Lock Down Kit, 19-Piece [More Info] | $85.00 | |
Lug Nut Soft Socket |
| This special thin walled, heavy duty IMPACT socket with a riveted Aluminum insert was developed for the crucial task of R&R of wheel lugs nuts/bolts without marring or scuffing the surface of the wheel or bolts. Measuring at 3.5" to fit into deep recess of wide wheels. Comes with a limited life-time warranty, guaranteed to be the last 17mm wheel lug socket you'll ever buy. |
|
PEL-TOL-LUG17MM | Impact Duty Soft-Walled Lug Nut Socket - 17mm, 1/2 inch drive [More Info] | $29.40 | |
These Chrome Molybdenum thin walled sockets have a plastic outer sleeve to prevent wheel damage during removal and installation of wheel fasteners. Each socket also has a durable plastic inset to help protect the nut head (note that the plastic insert does not protect the sides of the nut). This set includes color coded 17mm, 19mm, and 21mm protective sockets in a custom blow molded case. These sockets are 1/2" drive will help keep your wheels looking new.
NOTE: These are IMPACT-duty sockets for use with either impact or hand drivers. |
|
SCHW-PPS-1721 | Protecta Socket Set (17mm, 19mm, 21mm), 1/2 inch drive [More Info] | $19.00 | |
Lug Nut Torque Socket Set |
Take the guess work out of tightening your wheels, these Schwaben torque sockets will stop tightening when the appropiate torque has been reached. This handy color coded set includes 17mm, 19mm, and 21mm sockets in a compact blow molded case. Sockets are 1/2" drive and are preset for 100Nm (74ft-lbs)
NOTE: These are for use with hand drivers only - they are NOT suitable for impact guns. |
|
SCHW-PTS-12-1721 | Torque Socket Set (17mm, 19mm, 21mm), 1/2 inch drive [More Info] | $51.95 | |
Suspension Tools |
| You can never perform a good job on repairing your BMW if you don't have the right tool. A lot of people try to cut corners because they either don't have the tool they need, or they don't even know that it exists! Having the right tool for the job saves time, money, and wasted effort. A job that can take 4 hours without the right tool, can take a mere few minutes. You're already saving lots of money by doing the work yourself, spend some money and get the tool that you need. Once it's in your collection, you will not know how you got along without it! |
|
| CV Joint Removal Tool |
| Use our extra long allen socket removal tool to easily remove those pesky CV joint bolts without damaging your Axle boots. Avoid stripping your bolts, and spending wasted hours of cutting and grinding stripped bolts. 3/8 inch drive. |
|
PEL-TOL-P243 | CV Joint Removal Tool, BMW All [More Info] | $29.40 | |
| Rear Wheel Bearing Extractor and Installer Kit |
| If you want to save on a costly repair, replace your own bearing or pull your own hubs with our all in one master kit. Designed to efficiently remove and install hub and wheel bearings, this kit will make the notoriously difficult job of removing rear wheel bearings a breeze. The tool eliminates the need for such drastic measures such as a slide hammer or flame torch to remove the rear wheel bearing. The tool facilitates the installation and removal of the rear bearings, and makes the whole job 1000% easier. |
|
PEL-TOL-SIRB90-B1 | Hub/Bearing Extractor and Installer Kit, E30 3-Series (318, 325, M3) [More Info] | $319.00 | |
| PEL-TOL-SIRB90-B4 For the professional installer. Includes the components to R/R most BMW models, including: E23, E24, E28, E30, E31, E34, E36, E38, E46, Z3
|
|
| PEL-TOL-SIRB90-B4 | Hub/Bearing Extractor and Installer "Master" Kit [More Info] | $449.00 | |
